Summary of Contents for Marmitek IP EYE HOUSING 10
- Page 1 IPEyeHousing10 Outdoor IP Camera housing With heater and fan Quick Installation Guide 20285/20090212 IPEyeHousing10 © ALL RIGHTS RESERVED MARMITEK®2009...
- Page 2 © MARMITEK...
-
Page 3: Table Of Contents
IPEyeHousing10..............................1 Outdoor IP Camera housing ..........................1 With heater and fan ............................... 1 Quick Installation Guide ............................1 SAFETY WARNINGS ............................4 Box Contents: ..............................5 Introduction ................................5 Extra tools needed: .............................. 5 Installation................................5 Wireless setup:..............................6 Wired setup: .............................. - Page 4 In case of improper usage or if you have altered and repaired the product yourself, all guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal product responsibility.
-
Page 5: Ipeyehousing10
Box Contents: Outdoor Housing Mounting Bracket Bag with 4 mounting plugs, 2 screws and Allen key External Antenna for IPEyeAnywhere 11 and 21 Smaller Ethernet cable in order to paste through the housing Poweradapter extension cable for IPEyeAnywhere camera to paste through the housing Poweradapter Quick Installation Guide Introduction... -
Page 6: Wireless Setup
When you have a IPEyeAnywhere 11 or 21 and want to use it wireless, pass through the cable of the external antenna. Pass through the poweradapter extension cable. Remove the original antenna and connect the antenna cable .Connect the poweradapterplug. Connect the camera to the bracket with the supplied screw and a 10 mm spanner. © MARMITEK... -
Page 7: Wired Setup
Wired setup: When you want to use a wired connection, pass through the flat Ethernet cable and the poweradapter extension cable. Connect the camera to the bracket with the supplied screw and a 10 mm spanner. IPEyeHousing10... -
Page 8: Mounting The Ipeyehousing10
Drill the 8mm holes, insert the screws and fix the mounting bracket on the wall. Mount the mounting bracket to the housing with the provided screws. Use the provided Allen key to secure the mounting bracket at the desired position. © MARMITEK... -
Page 9: Technical Specifications
TECHNICAL SPECIFICATIONS: Input Voltage: 12V DC (included); 15W Dual-element heater is thermostatically controlled. Fan: activates at 35°C deactivates at 25°C Heater: activates at 15°C deactivates at 25°C Construction: Aluminum Finish: Beige coated Housing size: 147 x 140 x 270 mm IP value: IP66 Ambient temperature:... -
Page 10: Declaration Of Conformity
Copyright and all other proprietary rights in the content (including but not limited to model numbers, software, audio, video, text and photographs) rests with Marmitek B.V. Any use of the Content, but without limitation, distribution, reproduction, modification, display or transmission without the prior written consent of Marmitek is strictly prohibited. - Page 11 IPEyeHousing10...
Need help?
Do you have a question about the IP EYE HOUSING 10 and is the answer not in the manual?
Questions and answers