TALK-N-GO
RECHARGEABLE WALKIE TALKIES
Congratulations! You now have a way to covertly communicate with
anyone off the grid or if your cell phone isn't available. Use these
handy walkie talkies on your outdoor adventures or as part of your
overall preparedness plans.
high power
volume
scanning
channel
battery level
channel
channel
setting
unlocking
receiving
earphone
transmitting
volume
INSTRUCTIONS FOR USE:
1. Press and hold power button until you hear a beep to power on
the unit. The screen will show arrows as it fully powers on. When
on and idle, a single dot will flash on screen so you know the
alarm
power is on.
2. Once fully on, and the screen shows the channel, you may adjust
channel setting or volume.
Volume: The Talk-n-Go powers on at the highest volume level.
Simply press the left arrow to adjust the volume down, right to
earphone
adjust up.
Channel: All walkie talkies must be on the same channel to
communicate. To change the channel, press the center button
once to activate the channel adjust mode then hit the left or
right arrows to scroll through the 16 channels. Once you pick a
channel, you can either press the center button again or simply
wait a few seconds to lock in the new channel.
3. Once all parties are powered on and set to the correct channel,
simply press the Push-to-Talk button on the left side of your unit
Need help?
Do you have a question about the TALK-N-GO and is the answer not in the manual?
Questions and answers