Figure 2 Figure 1 Figure 2 About the Simulator About the Simulator General Instructions for Use The Nasco Healthcare Blood Life/form The Nasco Life/form Blood Pressure Simulator is designed for years of The Nasco Blood Pressure Simulator is designed for years of ®...
Page 3
“Calibration Procedures.” unit. First, locate the end of the pressure line attached to the sphygmo- marked CUFF. (See figure 3.) Life/form Familiarizing Yourself with the Nasco Blood Pressure Figure 5 Figure 6 manometer that has the male luer fitting attached to it. Attach this to the ®...
Page 4
The pulse in the wrist will begin when the electronic box is turned on. During The Nasco Healthcare Blood The pulseless setting will also turn off the sounds in the arm. The pulse will feature.
Page 5
Figure 10 Figure 11 Life/form Using the Nasco Blood Pressure To do this, press the Menu key ® The down arrow key will set the pulse to pulseless. Press the arrow up key to...
Page 6
This is the level 7 (the highest volume). diastolic blood pressure. Compare the results of reading Using the Nasco Healthcare the systolic and diastolic blood pressures on the gauge with the Blood Pressure Simulator respective settings on the simula- First, verify that the pressure tor.
Menu key to When the battery supply diminishes to a level near the p section titled “Using The Nasco will no longer function properly, the “low batt” segment change the diastolic window.
Page 8
Figure 16 Figure 14 Figure 15 Figure 17 Life/form Preparing Your Equipment for Use with the Nasco ® Blood Pressure Simulator...
Need help?
Do you have a question about the CPARLENE LF03204 and is the answer not in the manual?
Questions and answers