RX-A1050/RX-V1079
Note:
When the DIGITAL P.C.B. or IC78 on DIGITAL (1) P.C.B. is replaced, this unit will display "Internal Error" and will not
operate properly. The model name MUST be written to the backup IC (EEPROM: IC78 on DIGITAL (1) P.C.B.) to
have proper operation. (For detailed procedure, refer to related Service News or Service Bulletin. Or contact your
local Yamaha representative.)
注意:
DIGITAL P.C.B. または DIGITAL(1)P.C.B. の IC78 を交換すると、"Internal Error" が表示されて本機が正常に動作
しなくなります。正常に動作させるために、モデル名をバックアップ IC(EEPROM:DIGITAL(1)P.C.B. の IC78)
へ書き込む必要があります。 (詳しい手順は、関連するサービスニュース、または技術報告を参照してください。
もしくはヤマハのサービスセンターまでご連絡ください。 )
■ CONTENTS
FRONT PANELS ............................................................ 3
REAR PANELS .......................................................... 4-7
INTERNAL VIEW ......................................................... 17
UPDATING FIRMWARE /
ダイアグ(自己診断機能) .................................... 27-76
パワーアンプ調整 ................................................ 77-78
1 0 1 3 4 0
AV RECEIVER
SERVICE MANUAL
DISPLAY DATA ...................................................... 79-81
IC DATA .................................................................. 82-96
システム設定を変更する ............................................ 196
ファームウェア更新手順 .................................... 209-214
Need help?
Do you have a question about the RX-A1050 and is the answer not in the manual?
Questions and answers