Advertisement
Advertisement
Table of Contents
Summary of Contents for UltraLink Products Auto A1
- Page 1 Apple CarPlay Android Auto Dashboard Display A1 USER MANUAL gentec-intl.com...
- Page 2 SAFETY AND IMPORTANT INFORMATION Warning: Use only under safe and legal conditions. Do not interact with the device unless conditions permit safe use. Failure to follow instructions could impair driving and lead to serious injuries, or in extreme cases, fatalities. Distraction Risk This product assists you with driving when used appropriately.
- Page 3 Installation Warnings • It’s important to install this device at a location that does not obstruct your field of vision or block access to essential vehicle controls. • Do not place the device where it might interfere with the function of airbags. •...
- Page 4 INTRODUCTION The Ultralink Auto Dashboard Display A1 enhances your driving experience with smarter technology. Wirelessly connect via Apple CarPlay or Android Auto to your phone to enjoy optimized navigation and music streaming apps. Output audio to the car wired or wireless. Explore additional built-in features that will further enhance your journey.
-
Page 5: Rear Camera Installation
DASHBOARD DISPLAY INSTALLATION See the SAFETY AND IMPORTANT INFORMATION sections for warnings and important information Power up your Ultralink Auto Dashboard Display A1 using the provided power adapter to ensure all features are working properly before installation. Before installation, choose a flat or near-flat location on your dashboard for the display. Ensure the device does not obstruct your field of vision or interfere with vehicle controls and airbags. - Page 6 WIRELESS APPLE CARPLAY AND WIRELESS ANDROID AUTO Apple CarPlay: 1. At the main screen, tap on the Apple CarPlay icon to enter pairing mode. 2. Turn on your iPhone’s Bluetooth and Wi-Fi. Search and connect to the Bluetooth device: Ultralink_XXX. Ultralink_XXX 3.
-
Page 7: Audio Output
Connect with a Cable: The Ultralink Auto Dashboard Display A1 also supports wired connections to your phone. Connecting the display to your iPhone or Android phones requires a USB-A to lightning or USB-A to USB-C cable (cables sold separately). Simply plug USB-A side of the cable into the back of the display and the other side of the cable into your phone. -
Page 8: Other Features
OTHER FEATURES: Auto Brightness and Day/Night Mode The Ultralink Auto Dashboard Display A1 supports scheduled day/night mode switch. 1. At the main screen, tap on the Settings button to enter settings. 2. Under “Display & Brightness”, turn on “Night Mode”. 3. -
Page 9: Technical Specifications
TECHNICAL SPECIFICATIONS • Screen size: 7 inch • Screen resolution: 1024*600 • Power input: 9V~16V Note: Using power adapter other than the one that comes included might not provide enough power for the unit or causing other issues such as unstable connections. TROUBLESHOOTING The display is not turning on after I plugged in the USB-C power cable. - Page 10 SERVICE Customer Support The illustrated products and specifications may differ slightly from those supplied. For more information or service contact our Customer Service Department. E-mail Phone service@gentec-intl.com 905-513-7733 Ultralink One-Year Limited Warranty Summary Ultralink warrants the included hardware product and accessories against defects in materials and workmanship for one year from the date of original retail purchase.
Need help?
Do you have a question about the Auto A1 and is the answer not in the manual?
Questions and answers