THE BATTLESCAPE
4. You will now see your Triton Sub on the sea
bed. Its cabin roof is 'peeled away' to reveal
your squad of eight aquanauts within.
The bottom section of the screen contains a
number of buttons and displays. This section
of the screen is known as the Control Bar.
USING THE SPLIT LEVEL
VIEW
5. The Battlescape is built up of several
levels. You can view these individually or
assembled them into a complete 3-D
picture. Splitting the Battlescape into
levels allows you to see behind walls and
inside buildings or Subs.
At the moment, the Battlescape is set to its
normal setting — the Multi-level View. The
Multi-level view hides everything above the
currently selected level, which is why the
Triton Sub appears to have no roof.
TERROR FROM THE DEEP
Click on the
Bar. The number on the button changes
to 2.
The cabin roof and wings of the Triton Sub
appear. Your aquanauts are now hidden
from view. This is the Full View of the
Battlescape.
6. Click on the
ber on the button will change back to 1.
The Battlescape returns to the Multi-level
View.
7. When you are in any of the Multi-level
Views, you might need to switch to the
next level down or up.
Click on the
8. The display again changes, now showing
the Triton from three or four levels higher.
The View window now represents the new
level.
16
button in the Control
1
button again. The num-
1
button.
TERROR FROM THE DEEP
Need help?
Do you have a question about the X-COM-TERROR FROM THE DEEP and is the answer not in the manual?
Questions and answers