Page 1
LED TV LF63** www.lg.com ENERGY AV MODE INPUT SAVING FLASHBK LIST MARK (M4 X L10) (M4 X L14) MUTE MENU INFO Q.MENU ENTER 32LF63** 40LF63** BACK EXIT L/R SELECT FREEZE RATIO (M4 X L14) (M4 X L16) 43/49/55LF63** 60/65LF63** : Depending on model / Selon le modèle / Dependendo do modelo /...
OWNER’S MANUAL Safety and Reference LED TV* * Disclaimer LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL68702222* P/NO : MFL68702222 (1507-REV03) Printed in Korea...
Page 10
India region only. (Below sentence is not applicable for above 1920 X 1080 resolution TV models.) ATTENTION: This product is qualified for the BEE Star rating in the ‘Home’ Mode. The Objectives of Star Labeling Program is designed to promote energy efficient products and practices. When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.
Safety instructions Please read these safety precautions carefully before using the product. Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on WARNING earth.) Otherwise possibility you may be electrocuted or injured. Insert power cable plug completely into wall socket otherwise if not Do not place the TV and/or remote control in the following secured completely into socket, fire ignition may break out.
Page 12
Do not plug too many electrical devices into a single multiple electrical Do not put or store inflammable substances near the product. There is a outlet. Otherwise, this may result in fire due to over-heating. danger of combustion/explosion or fire due to careless handling of the inflammable substances.
Page 13
Only use an authorized AC adapter and power cord approved by Do not disassemble, repair or modify the product at your own LG Electronics. Otherwise, this may result in fire, electric shock, discretion. Fire or electric shock accident can occur.
Page 14
If you install the TV on a stand, you need to take actions to prevent the Make sure there are no objects between the remote control and its product from overturning. Otherwise, the product may fall over, which sensor. may cause injury. If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product.
Page 15
Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. When unplugging the cable, grab the plug and unplug it, by pulling at the plug.
Page 16
Viewing 3D imaging (Only 3D models) WARNING The panel is a high technology display product with resolution of Viewing environment two million to eight million pixels. You may see tiny black dots and/ or brightly coloured dots (red, blue or green) at a size of 1 ppm on the • ...
Page 17
Cautions when using the 3D glasses < 18 mm • Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. • Use a certified cable with the HDMI logo attached. • Do not use 3D glasses instead of your normal glasses, sunglasses or • ...
• Hold the top and bottom of the TV frame firmly. Make sure not to * Some models require Wi-Fi/Bluetooth Dongle for using Magic hold the transparent part, speaker, or speaker grill area. Remote or LG Audio Device. * Supporting device of Wi-Fi/Bluetooth Dongle is a different in accordance with model.
Using the joystick button Mounting on a table You can simply operate the TV functions, pressing or moving the joystick (Image shown may differ from your TV.) button up, down, left or right. 1 Lift and tilt the TV into its upright position on a table. • ...
Use an authorised LG wall mount and We recommend the use of LG’s wall mount bracket. LG’s wall mount contact the local dealer or qualified personnel. bracket is easy to move with cables connected. When you do not use • ...
• For more information, refer to the manual supplied with the wall Antenna connection mount. • When installing the wall mounting bracket, use the Adhesive Connect the TV to a wall antenna socket with an RF cable (75 Ω). Label. The Adhesive Label will protect the opening from • ...
Remote control Views the information of the current programme and screen. Mutes all sounds. (Depending on model) Scrolls through the saved programmes. Moves to the previous or next screen. The descriptions in this manual are based on the buttons on the remote control.
Page 23
(Depending on model) RECENT MY APPS INPUT Q.MENU RATIO SUBTITLE LIVE MENU Q.VIEW GUIDE PAGE Shows the previous history. (HOME) Accesses the Home menu. Shows the list of Apps. (POWER) Turns the TV on or off. TELETEXT buttons( ) These buttons are used for teletext.
Magic remote functions Adjusts the volume level. Scrolls through the saved programmes. (Depending on model) (MUTE) Mutes all sounds. When the message “Magic remote battery is low. Change the battery.” is displayed, replace the battery. * By pressing and holding the button, audio descriptions function will be enabled.
Page 25
How to use magic remote Used for viewing 3D video. (Depending on model) (Voice recognition) (Depending on model) Network connection is required to use the voice recognition function. 1. Press the voice recognition button. 2. Speak when the voice display window appears on the TV screen. • ...
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
Specifications Wireless module • Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. • This device should be installed and operated with minimum distance 20 cm between the device and your body.
Page 28
CI Module Size (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % 1 Only Satellite models.
5. To locate a nearest collection centre or call for pick-up (limited area only) for disposal of this appliance, please contact Toll Free No. 1800-180-9999 for details. All collection centre and pick up facilities are done by third parties whith LG Electronics India Pvt. Ltd. merely as a facilitator. For more detailed information, please visit : http://www.lge.com/in...
Page 32
(Only DTV) Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL https://manual-hub.com/...
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com https://manual-hub.com/...
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
Page 35
• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter which is not made nor provided by LG. • It can be purchased from computer stores that carry accessories for IT support professionals.
Page 36
EXTERNAL CONTROL DEVICE SETUP Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. * The connection interface may differ from your TV.
Page 37
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • • Baud rate : 9600 bps (UART) Stop bit : 1 bit • • Data length : 8 bits Communication code : ASCII code • • Parity : None Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
Page 38
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
Page 39
EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
Page 40
EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
Page 41
EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
Page 42
EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
Page 43
11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
Page 44
EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x] https://manual-hub.com/...
Need help?
Do you have a question about the 55LF63 Series and is the answer not in the manual?
Questions and answers