INSTALLATION AND ASSEMBLY CONSIDERATIONS ◆ Connect the suction and discharge ports of the pump with hose or flexible pipe to avoid damage caused by vibration of the pump. ◆ Never step on the diaphragm pump or use other methods to apply weight to the pump body, or the pump body is suspended.
solvent to wash the pump inside after stop working. To avoid the pump from being unable to be transported normally or parts deformation and damage due to sedimentation or agglomeration at the next startup. PRECAUTIONS DURING MAINTENANCE ◆ When the pump is in operation, it is absolutely impossible to perform maintenance, inspection and disassembly to avoid personal accidents caused by leakage or splashing.
Need help?
Do you have a question about the DS14-AAT- 0 Series and is the answer not in the manual?
Questions and answers