In these operating instructions, the designation “the tool” Always keep these operating instructions to- always refers to the PMA 30 laser receiver. gether with the tool. Component parts 1 Ensure that the operating instructions are with the tool when it is given to other persons.
2.1 Use of the product as directed 2.3 Items supplied with the PML 32‑R with laser receiver The Hilti PMA 30 laser receiver is designed to detect the laser beams from the PML 32‑R line laser. PML 32-R line laser...
Do not discharge the batteries by short circuiting Hilti service center. as this may cause them to overheat and swell up. c) Have the tool repaired only at a Hilti service cen- Do not attempt to open the batteries and do not ter.
6.1 Switching the tool off and on 1 button (1). Press the on/off button (1). Hold the PMA 30 receiver in the laser beam with the receiving window at right angles to the projected 6.2 Working with the receiver plane of the line. The beam is indicated visually and The PMA 30 laser receiver can be used at distances of by an audible signal.
Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back old tools and appliances for recycling.
86916 Kaufering We declare, on our sole responsibility, that this product Deutschland complies with the following directives and standards: 2006/95/EC, 2004/108/EC, 2011/65/EU. Hilti Corporation, Feldkircherstrasse 100, FL‑9494 Schaan Paolo Luccini Matthias Gillner Head of BA Quality and Process Man- Executive Vice President agement Business Area Electric Tools &...
Need help?
Do you have a question about the PMA 30 and is the answer not in the manual?
Questions and answers