Page 1
Assembly Instructions Model No. HOGA-XK00678 Console Tables...
Page 2
Please keep the outer packaging and take photos of both the packaging and products, and then reach out to us at support@tribesigns.com or call us at 1-424-220-6888. We'll take care of everything and send you a free replacement, so you can enjoy your purchase as soon as possible without any hassle.
Page 3
When using the electric screwdriver , Reduce the power and torque to avoid damaging the furniture...
Page 4
! Caution Make sure all parts are included. Most board parts are labeled or stamped on the raw edge. Contach us for free replacement if having damaged or missing parts.
Page 6
Installation of Cams and Pins Screw the pin into the hole. To set the cams correctly, ensure that the arrow on the cam is opening to the hole of the pin it is locking. Lock the cam by turning the cam head with a screwdriver until it is tightened.
Page 7
A X10 A X10 M6*40mm Pay attention to the big hole facing upward when installing. The C screw passes through the big hole to connect to the plate. ST3.5*14mm...
Page 9
A X2 A X2 M6*40mm A X2 A X2 A X2 A X2 A X2 M6*40mm...
Page 10
M6*40mm Pay attention to the big hole facing upward when installing. The C screw passes through the big hole to connect to the plate. ST3.5*14mm Pay attention to the orientation of the holes.
Page 11
Pay attention to the big hole facing upward when installing. The C screw passes through the big hole to connect to the plate. Pay attention to ST3.5*14mm the orientation of the holes. M6*40mm ST7*40mm...
Page 20
No heartburn, when we handle the return Our way Their way support@tribesigns.com Re-package item Replacement/Refund Schedule pick-up Track package Replacement Contact our customer service team support@tribesigns.com 1-424-220-6888 www.tribesigns.com...
Need help?
Do you have a question about the HOGA-XK00678 and is the answer not in the manual?
Questions and answers