Advertisement
FRONT/REAR VIEW
TOP VIEW
O
P
SIDE VIEW
FRONT VIEW
A
M
N
H G
F
E D
REAR VIEW
I
J
K
5
REAR VIEW
I. ROTATE knob
Allows rotating of the projected image
J. FLIP button
Flips the projected image 180° degrees
K. FOCUS knob
Allows adjusting of the sharpness of the projected image
L. BATTERY COMPARTMENT
Accommodates 4 (four) UM-3 or AA 1.5V alkaline
batteries
SIDE VIEW
M. LIGHT SENSOR switch
Allows selecting of the LCD backlight modes - ON, OFF,
and AUTO
N. CONTINUOUS PROJECTION switch
Allows continuously projecting of the time and remote
temperature
O. FORECAST PROJECTOR
Projects weather forecast
P. SNOOZE / LIGHT button
Activates LCD backlight, snooze and projection for 5
seconds
R. TIME/TEMPERATURE PROJECTOR
Projects current time and remote temperature
7
FRONT VIEW
A.CLOCK WINDOW
Displays atomic time, alarms and calendar
B. FORECAST WINDOW
Displays weather forecast
Q
C.TEMPERATURE WINDOW
R
Displays indoor and remote temperature
D.ALARM button
•
Allows toggling between the calendar display and
B
three alarm modes
•
Allows programming available alarms
C
•
Activates or deactivates available alarms
E. CHANNEL selector
•
Allows selecting different remote channel reading
•
Allows displaying minimum and maximum
temperature readings when used with DOWN (
button
F. MODE button
•
Allows toggling between the clock display modes -
time with seconds and time with day
•
Activates manual clock programming mode
G. UP (
) button
L
•
Increases all function parameters
•
Activates US Time Zone selection mode
•
Activates atomic time signal receiving function when
used along with DOWN (
H. DOWN (
) button
•
Decreases all function parameters
•
Activates the remote temperature signal search
function
•
Activates the atomic time signal receiving function
when used along with UP (
REMOTE SENSOR
FEATURES
• Remote temperature transmission to the main unit via
433 MHz signal
• 100 feet (30 meters) transmission range without
interference
• LCD displays of measured temperature
• Three transmission (3) channel selection
• Selection of the temperature display in Celsius or Fahrenheit
• Case can be wall mounted using built-in hanger
1
A
TM
THERMO – SENSOR
A. LED INDICATOR
• Flashes once when the remote sensor transmits a
reading to the main unit.
• Flashes twice when battery power is low.
B. BATTERY COMPARTMENT
Holds two AAA-size batteries
C. RESET
Resets all readings
D. CHANNEL switch
Selects the desired channel
E. WALL-MOUNT RECESSED OPENING
Keeps the remote sensor on the wall
F. °C/ °F Selector
Selects the temperature display in Celsius or Fahrenheit
)
) button
) button
6
E
MADE IN CHINA
C
F
D
B
8
Advertisement
