Related Manuals for PST SensoScientific OTA Series
Summary of Contents for PST SensoScientific OTA Series
- Page 1 USER GUIDE OTA Wireless Data Logger Dual Band (2.4 GHz & 5 GHz) www.sensoscientific.com 685 Cochran Street, Ste. #200, Simi Valley, CA 93065 © 2024 SensoScientific, Inc. A PST Brand | All Rights Reserved...
-
Page 2: Table Of Contents
Remote Environmental Monitoring Solutions OTA WIRELESS DATA LOGGER ....................... 3 II. GETTING TO KNOW YOUR DEVICE ......................3 III. SENSOSCIENTIFIC CLOUD ........................4 IV. SETTING UP YOUR DEVICE: TOOL ......................5 Step 1 – Login to the SensoScientific Cloud ..................... 5 Step 2 –... -
Page 3: Ota Wireless Data Logger
Remote Environmental Monitoring Solutions OTA WIRELESS DATA LOGGER The OTA series is the second generation of Wi-Fi Sensors from SensoScientific. This series of nodes boasts over- the-air (OTA) upgrade capabilities. This enable the devices to remotely upgrade firmware without the need to be manually serviced. -
Page 4: Sensoscientific Cloud
Remote Environmental Monitoring Solutions III. SENSOSCIENTIFIC CLOUD The SensoScientific Cloud is the platform that all data is received and recorded. The cloud can be accessed via any internet enabled device using the following link: cloud.sensoscientific.com Use the login information provided to you to login. Figure III-1: Website Login Figure III-2 - Cloud Monitoring sensoscientific.com... -
Page 5: Setting Up Your Device: Tool
Remote Environmental Monitoring Solutions SETTING UP YOUR DEVICE: TOOL If you have opted for pre-configuration of Wi-Fi, please disregard “Setting Up Your Device.” Step 1 – Login to the SensoScientific Cloud cloud.sensoscientific.com A.) Navigate to HELP > Configuration Files B.) Download the SensoWifiProvisioning file, unzip, and click the .msi installer. C.) Once installation completes, a “Senso Wi-Fi Provisioning”... - Page 6 Remote Environmental Monitoring Solutions 8/30/2019 Figure IV-1 - Provisioning LED Flashing Now, press the left and right arrow buttons simultaneously to enter provisioning mode. 8/30/2019 Figure IV-2: Hold Left + Right buttons to enter Provisioning Mode sensoscientific.com...
-
Page 7: Step 3 - Open The Tool
Remote Environmental Monitoring Solutions Step 3 – Open the Tool Open the "Senso Wi-Fi Provisioning" shortcut on your desktop. Input the Wi-Fi information and click the "List Device" button. Your device will be listed in the box. Click the "Check All" link. Figure IV-3: Provisioning Software Press the "Start Provisioning"... - Page 8 Remote Environmental Monitoring Solutions Figure IV-4: Provisioning Software If any issues are found while trying to connect or at any time throughout the set-up process, please contact technical support. 1-800-279-3101 For support assistance, select option 4 when prompted. Plug the probe into the device and place the probe wherever you are looking to monitor data. Go to cloud.sensoscientific.com to access your data.
-
Page 9: Setting Up Your Device: Browser
Remote Environmental Monitoring Solutions SETTING UP YOUR DEVICE: BROWSER The device set-up process takes only a few short minutes. For the device to work properly, it must be set-up to a Wi-Fi Network. If you opted for SensoScientific to pre-configure the device, please disregard this section. SensoScientific device can be configured using the app available on iOS or Android devices. -
Page 10: Step 2 - Connect To Wi-Fi
Remote Environmental Monitoring Solutions 8/30/2019 Figure V-2: Hold Left + Right buttons to enter Provisioning Mode Step 2 – Connect to Wi-Fi On your Wi-Fi enabled device, connect to the Wi-Fi network “mysimplelink-57D475”. The last six digits of the network name are the last six digits of the OTA Node’s MAC Address. This will connect your phone to the OTA Node. - Page 11 Remote Environmental Monitoring Solutions Smartphone 1. From your Home screen, go to Settings > Wi-Fi. 2. Turn on Wi-Fi. Your device will automatically search for available Wi-Fi networks. 3. Tap the name of the Wi-Fi network that you want to join - “mysimplelink-57D475”. The digits after the hyphen will be the last 6 characters of the device’s MAC Address.
-
Page 12: Step 3 - Configure The Node
Remote Environmental Monitoring Solutions Step 3 – Configure the Node On your Wi-Fi enabled device (Laptop, iPad, etc.), go to an internet browser (Internet Explorer, Google Chrome, Firefox, etc.) and type 10.123.45.1 into the browser bar. Figure V-6 – “Status” Tab If a Static IP is required, go to the "Stations"... - Page 13 Remote Environmental Monitoring Solutions Go to Profiles to add the network information (SSID and Password). For Open, WEP, WPA1, and WPA2 authentication, enter the network information under Add Profile. Once all information has been put in, press “Add” for the profile to be saved. Figure V-8: “Profile”...
-
Page 14: Step 4 - Verify Profile
Remote Environmental Monitoring Solutions Step 4 – Verify Profile Once the profile has been added, go to the bottom of the Profile tab and verify that the profile has been added. It should be listed in any of the profiles. Figure V-10: Profiles Finally, restart the device to complete the configuration. -
Page 15: Display Notifications
Remote Environmental Monitoring Solutions DISPLAY NOTIFICATIONS The display shows critical notifications essential for device operation. Below, you'll find descriptions and a legend for each notification on the panel. 1.04 2 0 . 5 1 8 .9 2 2 .9 min: max: 03/15/2024 17:19:31... - Page 16 Remote Environmental Monitoring Solutions Battery: Displayed at High, Medium, Low, and Empty. min: Min/Max Readings: Shows the highest and lowest recorded readings on max: device. This can be reset at any time. Mac: MAC Address: Used to uniquely identify device. Figure VI-2: Display Legend sensoscientific.com...
-
Page 17: Led Status
Remote Environmental Monitoring Solutions VII. LED STATUS The three LEDs at the front of the device are used to indicate current status. The LED colors are green, yellow, and red – much like a traffic light. 8/30/2019 Figure VII-1: LED The following table explains each LED Status. - Page 18 Remote Environmental Monitoring Solutions Data Alarm (Power Supply): When device detects data outside predefined alarm limits in the cloud, an alarm will sound on the device. This alarm will persist until either the speaker is turned off or the data returns to a value within the alarm limits.
-
Page 19: Push-Button Functions
Remote Environmental Monitoring Solutions VIII. PUSH-BUTTON FUNCTIONS The OTA node offers a push-button interface. Most of the device functionality is accessed from this interface. To prevent unintended functions from being activated, Push-Button sequences are used. Wake Up: To get the latest reading and timestamp, press the center button to wake up the device and reset the screen. A solid yellow light will appear and the screen will reset. -
Page 20: Min/Max Reset
Remote Environmental Monitoring Solutions Min/Max Reset: The minimum and maximum readings on the display are constantly updated the moment the device turns on. However, these readings can be reset at any time. The following push-button sequence will accomplish this. Step 1 Press and hold the center and right button simultaneously. -
Page 21: Contact Sales / Technical Support
Remote Environmental Monitoring Solutions CONTACT SALES / TECHNICAL SUPPORT Our technical support team is available Monday through Friday, between the hours of 8:00 AM and 5:00 PM Pacific Standard Time. We also provide our clients with 24/7 support for emergency support requirements. Phone: 800-279-3101 For support assistance, select option 4 when prompted. -
Page 22: Document Information
Remote Environmental Monitoring Solutions DOCUMENT INFORMATION Version History Version Modified by Description of Change V5.00 ST / 04.04.2024 Initial version Associated forms and procedures Doc. No. Document Title Associate Records Doc. No. Document Title DOCUMENT END sensoscientific.com...
Need help?
Do you have a question about the SensoScientific OTA Series and is the answer not in the manual?
Questions and answers