Lectric eBikes XP4 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

USER MANUAL

Lectric XP4 eBike

V 1.0 | 2025

To prevent PROPERTY DAMAGE, SERIOUS INJURY, or DEATH, you should read, understand, and

follow the warnings and instructions in this manual. Keep for future reference.

Table of Contents

Need help?

Do you have a question about the XP4 and is the answer not in the manual?

Questions and answers

Mary Jane Schuchardt

August 11, 2025

What are the dimensions of the xp4 battery

Bryan Brutus

August 5, 2025

Best lubricant for bike chain

Nelda Fredrick

July 30, 2025

handle bars will not tighten tight

David Meyer

July 29, 2025

How do you take spring loaded sleeve out of the crank arm

cheryl judd weeden

July 25, 2025

During my ride on the lectric xp4, I noticed a flashing small green box on the display. Thoughts?

Nelda Fredrick

July 24, 2025

What do you have to do to receive a owner manual for xp4 bike

Douglas Alan Malear

July 24, 2025

I just received the XP 4 750 watt Lectric and put it together. I plugged the charger into the wall socket and the bike. After 2 hours the charger was hot to the touch. Is that normal? I unplugged it for now. And is the on/off switch next to where you plug bike in supposed to be on or off?

TIMOTHY R SHERWIN

July 23, 2025

bike chain lock does not fit in holder when mounted on bike have not received mirror yet and no owner's manual

Summary of Contents for Lectric eBikes XP4

Page 1 USER MANUAL Lectric XP4 eBike V 1.0 | 2025 To prevent PROPERTY DAMAGE, SERIOUS INJURY, or DEATH, you should read, understand, and follow the warnings and instructions in this manual. Keep for future reference.
Page 2: Contact Information
Lectric eBike, for this, you must use your own good judgment. For replacement parts and accessories, you should always use Lectric eBikes approved parts, as they have been specially designed for your bicycle and manufactured to meet Lectric eBikes’ demanding standards.
Page 3: Table Of Contents
TABLE OF CONTENTS Important Safety Information Getting Started Assembly Features Cockpit System Preparing to Ride Your First Ride Battery Pack Moving and Storing your Lectric eBike Disposal of Your Lectric eBike Troubleshooting Your Lectric eBike User Maintenance Instructions Legal L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 4 Additional User Information Online User Manual Scan the QR code to find the latest version of your manual. Lectricebikes.com/manual Electric Bicycle Owner’s Manual Scan the QR code to find the latest version of the universal electric bicycle owner’s guide. Lectricebikes.com/manual Battery Safety Manuals Scan the QR code to find safety information for batteries.
Page 5: Important Safety Information
IMPORTANT SAFETY INFORMATION Read and Understand Owner’s Manual Before Riding Read this entire Owner’s Manual before you take the first ride on your new eBike and keep it for reference. This Owner’s Manual contains important safety, performance, and service information. The latest version of your manual is available at lectricebikes.com/manual Like any sport, bicycling involves risk of injury and damage.
Page 6 contact with the ground at all times. Any other use is prohibited and may result in SERIOUS INJURY or DEATH. Your bicycle is NOT INTENDED for mountain bicycle use including any kind of jumping or downhill mountain biking. Riders should be proficient cyclists (ages 16+), riding where the tires are always on the ground, where permitted by law (not on pedestrian-use shared lanes or sidewalks).
Page 7 • Take responsibility for your own SAFETY. If you have any questions or do not understand any aspect of using or maintaining your bicycle, contact Lectric eBikes at contact@lectricebikes.com or call (602) 715- 0907. Helmets •...
Page 8 Ride at Your Own Risk and Use Common Sense • Always keep both hands on the handlebar grips and the brake levers so they are within reach while riding. • Do not ride distracted. Always remain alert to all riding conditions. Using the Display or other technology (including your mobile phone or music player) could distract you from riding.
Page 9 Pre-Ride Safety Checklist Lectric eBikes recommends going through each item on the pre-ride safety checklist before and after each ride. Spending time to make sure all of the bike’s components are in good working order before a ride is a crucial step along the way to a safe and fun ride.
Page 10 Make sure all hardware is tightened to the recommended torque specifications found in “Tightening Torque” on page 28 of the owner’s manual. Verify that the frame folding latch is securely closed and locked. Verify that the stem folding latch is securely closed and locked. Check that the handlebar stem is inserted past the minimum insertion point.
Page 11 On-Product Warning Labels and Tags There are warning labels on your Lectric eBike for your protection. If a label is missing or is not legible, contact Lectric eBikes for a replacement. States that recognize three classes of eBikes require a label to be placed on the bicycle denoting the class of your Lectric eBike, the motor’s wattage...
Page 12 PUEDE SER ILEGAL; CONSULTE LAS LEYES LOCALES. Terms of Purchase tag Class 2 label Class 3 label XP4 750W Class 2 label Class 3 label L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 13: Getting Started
Lectric eBike Charger 2 Battery Keys Display 2 QR Pedals If anything is missing or is damaged, contact Lectric eBikes immediately for assistance. For a video about how to setup your bicycle visit: LectriceBikes.com/first-ride-videos L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 14 Bike Diagram Step-Over Frame Charging Port Rubber Plug L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 15 Step-Thru Frame Charging Port Rubber Plug L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 16 Serial Number Your serial number is located on the head tube of the bicycle as shown below. Please write it down inside the front cover of this manual. You may be asked for your bicycle’s serial number as part of a warranty request.
Page 17 Stem Folding How to Unfold the Stem: To unfold and secure in riding position: 1. Begin with handlebars in the 2. Pull the handlebar stem to its folded down position. upright position. 3. Push the latch in firmly until it 4.
Page 18 How to Fold the Stem: To fold the stem down: 1. Pull up on the silver button 2. Pull the latch away from the labeled “open” to unlock the stem while still holding the latch. “open” button. 3. Fold the stem by lowering it to the side.
Page 19: Adjust Handlebar Height
WARNING! Ensuring a proper fit of your eBike is an important element of comfort and safety. Follow the instructions below carefully to make sure that you can safely and effectively control your eBike while riding. Adjust Handlebar Height WARNING! • Always tighten fasteners to the correct torque to prevent serious injury or death.
Page 20: Adjust Seat Height
Adjust Seat Height WARNING! • Always tighten fasteners to the correct torque to prevent serious injury or death. Bolts that are too tight can stretch and deform. Bolts that are too loose can move and fatigue. Either condition can lead to a sudden failure of the bolt and result in a crash.
Page 21 How to Adjust Seat Height: 1. Loosen the seat post clamp. The open and closed positions of the seat post clamp are shown below (closed position on left,open position on right); 2. Raise or lower the seat post in the seat tube; 3.
Page 22 Adjust Seat Position WARNING! Always tighten fasteners to the correct torque to prevent serious injury or death. Bolts that are too tight can stretch and deform. Bolts that are too loose can move and fatigue. Either condition can lead to a sudden failure of the bolt and result in a crash.
Page 23 How to Install the Display 1. Remove the display from the box 2. Align the display then and slide onto the mounting point push down to secure. at the center the cockpit. 3. Ensure the display locks in place 4. Then find the green and black to the tabs.
Page 24 How to Unfold and Fold the Frame To Unfold: 1. To unfold the bike frame, stand 2. Push down the latch firmly until near the frame where the battery it locks into position. Pull on the is exposed. Grab the front and latch to confirm that the latch has rear end of the bike.
Page 25 Only place battery pack on clean surfaces. Avoid getting dirt, e.g. sand or soil, in the charging port and contacts. • Do not charge or use battery pack if it is damaged. Contact Lectric eBikes to order a replacement. Your bike comes with a 48V lithium-ion battery. The bike’s battery comes with a unique set of keys that are used to keep it unlocked/locked to the frame.
Page 26: How To Install The Battery
OFF position (O). to the unlocked position and then remove the key. 3. Fold the XP4 frame to expose 4. Insert the key at the key port. Turn the the battery opening and slide the key clockwise to the locked position to battery into the frame.
Page 27: How To Remove The Battery
How to Remove the Battery To Remove: O/I rocker switched should be in 3. Fold the XP4 frame. the OFF position (O) Turn the key counter-clockwise to Pull the battery out of the frame. the unlocked position and remove the key.
Page 28: Tightening Torque
Tightening Torque Part Tool Spec Accessory Bolts 4mm allen 4-5 Nm Bottom Bracket BBT-9 40 Nm Brake Caliper Mounting Bolts 5mm allen 10 Nm Brake Lever Clamp Bolts 4mm allen 5 Nm Crank Bolts 8mm allen 40 Nm Disc Rotor Mounting Bolts T-25 Torx 5-8 Nm Display Clamp Bolts...
Page 29 How to Remove and Insert Pedals Removing Pedals 1. Pull the spring-loaded sleeve while also pulling the pedal out from the splined slot. Inserting Pedals 1. Pull the spring-loaded sleeve 2. Be sure the sleeve retracts, and insert the pedal axle while and give the pedals a small tug aligning the spline pattern.
Page 30: Features
Lectric eBike PAS system (e.g. chainring, chainring receptacle, pedals) must only be replaced with identical components or components that have been specifically approved by Lectric eBikes. This should help protect the motor from overloading. • Always remove the battery pack from your Lectric eBike before beginning work (e.g.
Page 31 8-Speed Gear System Your Lectric eBike comes with a 8-speed freewheel. The freewheel is the cluster of sprockets on the rear wheel of your bicycle. While pedaling in 1st gear (lowest gear using the largest sprocket), it will be easier to pedal up hills. In 8th gear (highest gear using the smallest sprocket), it will be easier to reach higher speeds on flat or downhill terrain.
Page 32: Hydraulic Disc Brakes
Before riding, check to ensure the brake levers do not touch the handlebars when fully applied. If either lever touches the handlebars, call Lectric eBikes to determine next steps. You will likely need your brakes bled.
Page 33 Have your brakes serviced at a certified reputable bike shop before riding again. The hydraulic disc brakes on this bike use mineral oil. Only use mineral oil purchased from Lectric eBikes or Shimano for service. WARNING! Never add or mix with DOT brake fluid or any mineral oil not intended for bicycle hydraulic disc brake use.
Page 34: Front And Rear Lights
Front and Rear Lights Your Lectric eBike comes with integrated front and rear lights. To turn lights ON: Hold plus (+) button on the display control pad for about 3 seconds until the lights turn ON. To turn lights OFF: Hold plus (+) button on the display control pad for about 3 seconds until the lights turn OFF.
Page 35: Suspension Fork
Suspension Fork The suspension fork will affect the handling of the bicycle, primarily when going over bumps and stopping. In some situations, it may be advantageous to lock the suspension so it is fully rigid. Check to ensure your suspension fork is properly adjusted for the terrain and your weight.
Page 36: Cockpit System
COCKPIT SYSTEM Cockpit Instruments Brake Levers TFT Display Gear Control Pad Shifter Thumb TFT Display Throttle Display Controls Plus Button Power Button Left turn Right turn signal button signal button Minus Button L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 37 Settings Screen Page Toggle Press and hold + and - Press Lights ON Walk Mode or Cruise Control Press and hold + Press and hold - L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 38 Pedal Assist Overview When does the Pedal Assist activate? Pedal Assist (PAS) functions only when you are pedaling. If you do not pedal, the PAS will not activate. The motor output always depends on your pedaling and the PAS level you have set. PAS automatically switches off at the maximum speed set for your Lectric eBike (up to 28 mph).
Page 39: Display Functions
Display Functions Battery percentage Maximum and Average Speed (PAS) Level indicator Light On/Off indicator Cruise Control indicator Wattage Output reading Turn Signals Walk Mode indicator Speedometer in MPH or KM/H Switch screens for Odometer, Trip, Voltage, Current, Trip Timer readouts L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 40 Battery Level Indicator Bar The Battery Percentage at the top right of the display screen is your battery indicator and shows the estimated charge level remaining in your battery pack. As the battery charge depletes, the battery percentage will reduce. When the battery voltage gets below the usable level, an E006 error code will pop up on the screen.
Page 41 Range Estimates The range the bicycle can go on a single battery charge can vary significantly between riders, terrain, wind conditions, user input, and additional cargo weight. Tips to Increase Range To get the maximum range out of each battery charge, there are some simple things you can do: •...
Page 42: Settings Menu
Changing setting not listed in the following table may cause your bike to stop working properly. If you need the default setting values of setting not listed, contact Lectric eBikes. DO NOT ride your bicycle until the default settings have been restored.
Page 43 Setting Default Explanation Screen Brightness Backlight display brightness. 1: Darkest, 2: Medium, 3: Brightest Sleep 0-60 minute range TFT Display sleep timer. The default setting will turn the display OFF after it has not been used for 10 minutes. Distance Units Tire Size 21.2 19.5 - 28 inch range...
Page 44 Changing Top Speed Your Lectric eBike ships with a maximum speed set at 20 miles per hour (mph). This means it is a Class 2 electric bicycle in states that recognize three classes of eBikes. In most states that only recognize eBikes generally, the 20 mph top speed is legal for use on public roads.
Page 45 Class 3 Label If you increase your bicycle’s top speed, you must remove the Class 2 label that displays your Lectric eBike class, top pedal assisted speed, and motor wattage. This label is posted near the seat tube on the bicycle. Peel back the Class 2 label to reveal the Class 3 label located underneath the Class 2 label.
Page 46: Walk Mode
Walk Mode Electric bicycles are heavier than bicycles. To make walking the bicycle easier, your Lectric eBike is equipped with Walk Mode, which can be toggled ON or OFF in the settings menu. Walk Mode may be subject to local regulations.
Page 47: Preparing To Ride
PREPARING TO RIDE Towing WARNING! When towing a trailer, do not exceed 20 miles per hour. Stopping with a trailer at speeds higher than 20 miles per hour can cause the trailer to jackknife and the rider to lose control which can lead to serious injury or death. WARNING! To prevent serious injury or death, go through the “Pre-Ride Safety Checklist”...
Page 48 1. Hold down the power button located on the left handlebar until the display comes on. 2. Select a Pedal Assist (PAS) level using the plus (+) and minus (-) buttons. OFF provides no motor assist. ECO is the lowest level of assist and TURBO is the highest level of assist.
Page 49: Carrying A Passenger
Lectric XP4 or XP4 Step-Thru. Do not stand on or otherwise misuse foot pegs, or damage to the product, serious injury, and/or death may occur.
Page 50 Check all regulations where you operate the Lectric XP4 or XP4 Step-Thru to ensure carrying a child, passenger, or cargo is allowed. The following list provides important tips for the safe operation of the Lectric XP4 or XP4 Step- Thru when used for carrying a passenger.
Page 51: A Note For Parents And Guardians
A child incapable of riding a bike independently or under the age of four should not ride as a passenger on the Lectric XP4 or XP4 Step-Thru unless seated in a properly fitted and approved child safety seat.
Page 52: Battery Pack
WARNING! Only use original Lectric eBike batteries for your eBike. Using other batteries can lead to injuries and pose a fire hazard. Lectric eBikes accepts no liability or warranty claims if other batteries are used. To prevent serious injury or death: •...
Page 53 • For an optimum service life, operate your Lectric eBike battery at temperatures between 32°F -104°F (0°C-40°C). • Battery leakage may occur under extreme usage or temperature conditions. Avoid contact with skin and eyes. Battery liquid is caustic and could cause chemical burns. If battery liquid comes in contact with skin, wash quickly with soap and water.
Page 54 • Only charge the battery using original Lectric eBikes chargers. When using chargers that are not made by Lectric eBikes, the risk of fire cannot be excluded. • Use the battery only in conjunction with your Lectric eBike. This is the only way in which you can protect the battery against dangerous overload.
Page 55 • Do not charge the battery with chargers other than the charger provided by Lectric eBikes. • Only charge the battery indoors and in dry spaces which are not excessively hot or cold (within 10°F of room temperature) in a room with a smoke alarm.
Page 56 • Do not expose the charger to rain or wet conditions. If water enters a charger, there is a risk of electric shock. • Only use the original Lectric eBikes battery charger supplied with your eBike or one approved for your eBike by the manufacturer and purchased from a trusted source.
Page 57: Battery Charging Information
Store any damaged battery or charger in a safe location and, as soon as possible, recycle or otherwise dispose of it according to local rules. Contact Lectric eBikes if you have any questions or to purchase a compatible replacement battery or charger.
Page 58 • The battery can be charged on or off the bike. To remove the battery see instructions “Installing and Uninstalling Battery Pack” on page 25. • The battery should be recharged after each use, so it is ready to go the full range per charge next ride.
Page 59 Note: PAS is deactivated during the charging process. After charging is complete and the light on the charger is green, disconnect the cable from the battery port and power cord from wall socket. If you have charged the battery in the bicycle frame, carefully insert the plug after charging, so that no dirt or water can enter the battery port.
Page 60 You may replace it yourself by purchasing a replacement battery pack from Lectric eBikes. Battery Pack Storage Conditions If possible, store the battery pack in a dry, well-ventilated place. Protect it from moisture and water.
Page 61: Battery Recycling
Troubleshooting the Battery Pack If you have any questions at all regarding the basic troubleshooting below, reach out to Lectric eBikes customer support by email at contact@lectricebikes.com, or call (602) 715-0907. Issue...
Page 62: Moving And Storing Your Lectric Ebike
MOVING AND STORING YOUR LECTRIC EBIKE Please observe storage temperatures for your Lectric eBike. Protect the Drive Unit, Cockpit System, and Battery Pack against extreme temperatures (e.g. from intense sunlight without adequate ventilation). Extreme temperatures can cause the components (especially the battery) to be damaged. Before shipping or transporting your eBike or battery on public transport or an airplane, check with the carrier for any restrictions on electronics or batteries and also check your local laws.
Page 63: Troubleshooting Your Lectric Ebike
TROUBLESHOOTING YOUR LECTRIC EBIKE If you have any questions at all regarding the basic troubleshooting below, reach out to Lectric eBikes customer support by email at contact@lectricebikes.com, or call (602) 715-0907. Issue Most Common Solutions Bicycle will not turn ON.
Page 64: Error Codes
Error Codes The components of your Lectric eBike are continuously monitored automatically. If a fault is detected, the corresponding error code will appear on the display. Error Code Meaning Most Common Solution PAS Sensor Fault Check PAS quick plug E003 Battery Undervoltage Fully charge battery E006...
Page 65: User Maintenance Instructions
USER MAINTENANCE INSTRUCTIONS You should have your bicycle maintained at regular service intervals at your local bicycle shop. WARNING! To prevent serious injury or death: • NEVER open any of the components, including the battery, display, motor, or PAS sensor. Service should only be performed by a bicycle repair shop.
Page 66 Tune-Ups 100 Mile Tune-Up After 100 miles, or 5 full battery charge cycles, have the following services performed at a bicycle shop: • Check that your brakes are functioning correctly and adjust if necessary. • All hardware should be adjusted to the specified “Tightening Torque” on page 28.
Page 67 Tampering can void your warranty and render your bicycle noncompliant with the applicable laws and regulations. Lectric eBikes is not responsible for any direct, incidental, or consequential damages. This includes, without limitation, damages for personal injury, property damage or economic losses due to tampering.
Page 68: Legal
We will replace any parts deemed to have been damaged during shipping. Shipping damage must be reported to Lectric eBikes within 14 days of shipment arrival. This applies to all products including bikes and accessories.
Page 69 Lectric eBikes. To determine if coverage is provided, you should contact your insurance company or agent. Damage as a result of an accident is not covered under this warranty, and Lectric eBikes is not responsible for repair or replacement of damaged bikes or parts.
Page 70: Liability Disclaimer
Lectric eBikes strongly encourages and recommends that all customers have a certified and reputable bicycle mechanic complete a full inspection of each component on the bicycle to ensure it is safe for operation. Lectric eBikes makes no claims or guarantees that the brakes, battery, frame, motor, motor...
Page 71 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Page 72 WARNING - When using this product, basic precautions should always be followed, including the following: A) Read all the instructions before using the product. B) To reduce the risk of injury, close supervision is necessary when the product is used near children. C) Do not put fingers or hands into the product.
Page 73 AVERTISSEMENT- Lors de l’utilisation de ce produit, il convient toujours de respecter des précautions élémentaires, notamment les suivantes: A) Lire toutes les directives avant d’utiliser le produit. B) Pour limiter les risques de blessure, exercer une surveillance étroite si le produit est utilisé...
Page 74 The latest version of your manual is available at lectricebikes.com/manual...