Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for TASHA Amplification Tasty 19 PT
- Page 1 Tasty 19 PT Tasty 19 PT User Manual...
- Page 2 „Tasty 19 PT“ Connected Combo Design User Manual & Technical Information Version 0.1/2022 Foreword Thank you for choosing the Tasty 19 from . You now own a 19-watt all-tube amplifier in the "Connected Combo Design" of the highest quality. This is a fully hand-built and wired amplifier (handwired –...
-
Page 3: Table Of Contents
2.1 Connecting to the Combo Box 3. The Connected-Combo-Box 3.1 Connected Combo Design 3.2 The Speaker 4. Starting the Tasty 19 PT Power Connection, Combi Power Switch (Off-Std.By-On) 4.1.1 Mains Connection 4.1.2 Combi Power Switch (Off-Std.By-On), Stand-By (warm-up) 4.1.3 Tube Protection 4.1.4 Optimal Operating Temperature... -
Page 4: Warnings
1. Warnings 1.1 Warnings and Safety Regulations For product liability reasons, we are required to clearly highlight certain safety aspects, which must not be overlooked under any circumstances. With all due respect, we ask you to carefully follow the checklist listed below. -
Page 5: The Top Unit
2. The Top Unit 2.1 Connecting to the Connected-Combo-Box The Tasty 19 Top Unit is designed to be securely and stably connected to the accompanying Connected Combo Box. Once the top unit is connected to the box, the "Combo" can easily be transported using the carrying handle of the top unit. -
Page 6: Power Connection, Combi Power Switch (Off-Std.by-On)
4. Commissioning Power Connection, Combi Power Switch (Off-Std.By-On) 4.1.1 Power Connection / Mains Before connecting to the power supply, ensure that the Combi Power Switch “Off-Std.By-On” is set to the “Off” position (tilted downward) and that the operator’s mains voltage matches. The device is approved exclusively for operation at 115V (US) –... -
Page 7: Rear Panel
5.1.1 Signal Input Jack A guitar is connected to the input jack using a standard 6.3 mm jack plug and guitar cable. The quality of the cable and connection can significantly affect the amplifier's sound quality at this critical point. 5.2 Rear Panel Main Connector with Main Fuse, HT Fuse Speakerjack, Feedback Damping, Presence... -
Page 8: The Clean Channel
5.2.4 Speaker-Connedtion / Wireless Integration The Tasty 19 features a speaker output with 8-ohm impedance, suitable only for external cabinets of the same impedance. For use with the Tasty 19 Connected Combo Box, no speaker cable is required. Securing the Tasty 19 head to the Combo Box via the central screw automatically establishes the speaker connection. -
Page 9: Nfc - Feedback Damping
6.3 NFC – Feedback Damping The Feedback Damping knob adjusts the negative feedback of the power stage, influencing distortion, volume, and treble. Full clockwise (min): Maximum volume and treble. Counterclockwise (max): Reduced volume and treble, with a warmer, rounder tone. Middle position (“Tasty”): Balanced default setting. -
Page 10: The Poweramp
8. The Power Amp of the Tasty 19 8.1 Power Tubes The power stage uses a matched pair of EL84 Premium tubes, providing about 19 watts in pentode mode or 11 watts in triode mode. 8.2.1 Aging and Replacement Power tubes are subject to wear. Replace the entire matched pair if one fails, typically every 2-4 years depending on usage. -
Page 11: Technical Specifications
10.Technical Specifications Main Power 115Volt / 60Hz (US-only) - 230Volt / 50Hz (EU) Fuses: Main Fuse: 2A (US) – 1A (EU) HT Fuse: 0.25A Tubes: V1: 12AY7, special selected V2: 12AX7, balanced special selected V3, V4: EL84 Premium matched pair Output Power: ~19W (Pentode), ~11W (Triode) at 8 Ohms ...
Need help?
Do you have a question about the Tasty 19 PT and is the answer not in the manual?
Questions and answers