Advertisement
Quick Links
Cable Manager Locking Details
4. After positioning the cable manager
into the table cut-out, insert the
mounting clamp into the enclosure
for securing the unit to the table surface
(on both sides)
View After installing the cable manager on the table
Ensure the mounting clamps has been assembled
as per the above instruction (on both sides)
www.logicav.in
5. Softly tighten the screw to secure
the enclosure towards the bottom
side of the table (on both sides)
Surface
Table
Bottom
INSTALLATION MANUAL
CABLE MANAGER
MODEL
SERIES
LC-406SS
CABLE MANAGER SERIES
www.logicav.in
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Logic CABLE MANAGER LC-406SS
- Page 1 Cable Manager Locking Details INSTALLATION MANUAL CABLE MANAGER 5. Softly tighten the screw to secure 4. After positioning the cable manager the enclosure towards the bottom into the table cut-out, insert the side of the table (on both sides) mounting clamp into the enclosure for securing the unit to the table surface (on both sides) View After installing the cable manager on the table...
- Page 2 Checklist 2. Installation Instructions to cut-out on the table: ATTENTION: The cut-out on the table for the cable manager should be LOGIC 266.00 executed only by an experienced craftsperson to prevent TABLE any damage/ scarring. CUT OUT TEMPLATE R11.00 CAUTION : Wear safety glasses while operating power equipment.
Need help?
Do you have a question about the CABLE MANAGER LC-406SS and is the answer not in the manual?
Questions and answers