Summary of Contents for Flaig HX Series
- Page 1 Manual for HX Magnetic Transporter Feurenmoos 15 • 78739 Hardt Tel.: +49 7422 / 940010 • Fax +49 7422 / 9400125 info@flaig-te.de • www.flaig-te.de...
- Page 2 HX Magnetic Transporter General safety regulations The following safety instructions must be observed in order to ensure safe and accident-free working with magnetic transporters. As a general rule, only those employees may operate magnetic transporters who - are trained in handling magnetic transporters - are familiar with the relevant accident prevention regulations - have read and understood our operating instructions and safety regulations The operator is responsible for observing the safety regulations and for the technical condition of the magnetic trans-...
- Page 3 HX Magnetic Transporter Limitation of the nominal lifting force The nominal lifting force is achieved if the conditions described above are met and if the load is made of a low-carbon steel, e.g. St37 or C22. Alloying additives reduce the lifting force, so that For example, only a lifting force of approx. 60% of the lifting force of St37 is achieved with a steel X12Cr13.
- Page 4 SICHERHEITS-HINWEISE HANDLING INSTRUCTIONS / CONSIGNES D´UTILISATION Es besteht Verletzungsgefahr bei unsachgemäßer Behandlung von Magneten. Daher sollten Sie im Umgang mit Magneten folgendes unbedingt beachten: Magnets can represent risks of injury in case of inproper handling. We therefore recommend to respect the following instructions when handling with magnets: Les aimants peuvent représenter un risque de blessure en cas d´utilisation inadequate.
Need help?
Do you have a question about the HX Series and is the answer not in the manual?
Questions and answers