3Com SS II 100BASE FX TRANSCEIVER User Manual

Lifetime Limited Warranty
The duration of the warranty for the 100BASE-FX Transceiver Module (3C16681) is lifetime.
Advance hardware exchange is available during the first year from your date of purchase in accordance with 3Com's standard terms and
conditions for such service. After the first year, the warranty reverts to 3Com's standard lifetime limited warranty.
To qualify for the lifetime limited warranty and the advance hardware exchange, you must submit the appropriate product warranty registration
card to 3Com, otherwise this product will be warranted for a period of one (1) year without advance hardware exchange.
3Com warrants its hardware products to be free from defects in workmanship and materials, under normal use and service, for the
following lengths of time from the date of purchase from 3Com or its Authorized Reseller:
Lifetime
One year unless otherwise specified above
90 days
If a product does not operate as warranted above during the applicable warranty period, 3Com shall, at its option and expense, repair the
defective product or part, deliver to Customer an equivalent product or part to replace the defective item, or refund to Customer the purchase
price paid for the defective product. All products that are replaced will become the property of 3Com. Replacement products may be new or
reconditioned. Any replaced or repaired product or part has a ninety (90) day warranty or the remainder of the initial warranty period, whichever
is longer.
3Com shall not be responsible for any software, firmware, information, or memory data of Customer contained in, stored on, or integrated with
any products returned to 3Com for repair, whether under warranty or not.
3Com warrants that the software programs licensed from it will perform in substantial conformance to the program specifications
therefor for a period of ninety (90) days from the date of purchase from 3Com or its Authorized Reseller. 3Com warrants the media containing
software against failure during the warranty period. No updates are provided. 3Com's sole obligation with respect to this express warranty shall
be (at 3Com's discretion) to refund the purchase price paid by Customer for any defective software products, or to replace any defective media
with software which substantially conforms to 3Com's applicable published specifications. Customer assumes responsibility for the selection of the
appropriate applications program and associated reference materials. 3Com makes no warranty or representation that its software products will
work in combination with any hardware or applications software products provided by third parties, that the operation of the software products
will be uninterrupted or error free, or that all defects in the software products will be corrected. For any third party products listed in the 3Com
software product documentation or specifications as being compatible, 3Com will make reasonable efforts to provide compatibility, except where
the non-compatibility is caused by a "bug" or defect in the third party's product.
Standard warranty service for hardware products may be obtained by delivering the defective product,
accompanied by a copy of the dated proof of purchase, to 3Com's Corporate Service Center or to an Authorized 3Com Service Center during the
applicable warranty period. Standard warranty service for software products may be obtained by telephoning 3Com's Corporate Service Center or
an Authorized 3Com Service Center, within the warranty period. Products returned to 3Com's Corporate Service Center must be pre-authorized
by 3Com with a Return Material Authorization (RMA) number marked on the outside of the package, and sent prepaid, insured, and packaged
appropriately for safe shipment. The repaired or replaced item will be shipped to Customer, at 3Com's expense, not later than thirty (30) days
after receipt of the defective product by 3Com.
IF A 3COM PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER'S SOLE REMEDY FOR BREACH OF
THAT WARRANTY SHALL BE REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT 3COM'S OPTION. TO THE FULL EXTENT
ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR
CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS,
OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. 3COM NEITHER ASSUMES NOR
AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR
USE OF ITS PRODUCTS.
3COM SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE
PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR
TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY
ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
TO THE FULL EXTENT ALLOWED BY LAW 3COM ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY,
WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE
DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL
LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF
ITS PRODUCTS, EVEN IF 3COM OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS
LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT 3COM'S OPTION. THIS DISCLAIMER OF LIABILITY FOR
DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential
damages for certain products supplied to consumers or the limitation of liability for personal injury, so the above limitations and exclusions may be
limited in their application to you. This warranty gives you specific legal rights which may vary depending on local law.
This Limited Warranty shall be governed by the laws of the state of California.
, 5400 Bayfront Plaza, Santa Clara, CA, 95052-8145, U.S.A. Tel: (408) 764-5000, 9/1/96
3Com, SuperStack, and Transcend are registered trademarks of 3Com Corporation.
Other brand and product names may be registered trademarks or trademarks of their respective holders.
© 3Com Ireland
Part No. DUA1668-1AAA01
Published May 1997
100BASE-FX T
®
The 100BASE-FX Transceiver Module
The 100BASE-FX Transceiver Module
(3C16681) is designed for use with 3Com's
®
SuperStack II range of units.
The Module can be installed in a suitable unit
with a Fast Ethernet (100Mbps) transceiver
port slot. At present, suitable units are:
SuperStack II PS Hub 50 (3C16450)
The Module may also be installed in other suit-
able units, released by 3Com since this user
guide was published.
Do not install the Module in
unsuitable units such as 10Mbps-only
hubs or Hub 100 units. Contact your sup-
plier for advice if necessary.
When installed in a suitable unit, the Module
provides a single 100Mbps Fast Ethernet fiber
port. You can use this port to provide a
high-speed connection to the rest of your
network infrastructure, or to a local server or
endstation.
Examples of network configurations, informa-
tion about configuring ports through manage-
ment, and more information about Fast
Ethernet configuration rules can be found in
the unit's user guide.
Important Safety Information
Installation and removal of the
Module must be carried out by qualified
personnel only. Before installing the
Module into a unit, you must first discon-
nect the unit from the mains power supply.
For full safety instructions, refer to the
user guide that accompanies the unit.
M
RANSCEIVER ODULE
U G
SER UIDE
Under normal viewing conditions, there is
no eye hazard from the transmit LED. We
recommend, however, that you do not
view the LED through any magnifying
device while it is powered on. Never view
the fiber Tx port or fiber cable ends directly
when the Module is powered on.
L'information de Sécurité Importante
L'installation et l'enlève-
ment de l'unité doivent être faits seule-
ment par le personnel qualifié. Avant
d'installer le module dans une unité ou de
l'en retirer, vous devez d'abord décon-
necter les alimentations électriques de
l'unité. Pour plus de details sur les instruc-
tions de sécurité, veuillez vous reférer au
guide utilisateur qui accompagne cette
unité.
les conditions de visionnement ordinaires, il
n'y a pas de danger à l'oeil à cause de la
diode électroluminescente d'émission.
C'est recommandé, cependant, que la
diode électroluminescente ne soit pas
examinée avec aucun appareil de grossisse-
ment pendant qu'elle est sous tension.
C'est recommandé que le port de fibre Tx
et les fins de câble du fibre ne soient
jamais directement examinées pendant
qu'ils soient sous tension.
Sous