Voltage supply ranges from 8V to 28V. E34-DTU (2G4D27) is a typically high speed transmission, under a variety of baud rate, can achieve full-duplex features (bidirectional transceiver) at the same time, unlimited package long, support continuous transmission, support...
Page 5
User needs to open the mode switch first before link DTU with computer if the user want to modify parameters. 4、 Firing up (E34-DTU parameter configuration application) to modify E34-DTU digital radio configuration software related parameters. The mode switch must be reopened to achieve transmission after the configuration.
Also choose the VCC and GND terminal power supply, only choose any one of the power supply is OK; E34-DTU can use 8~ 28V DC power supply, but it is recommended to use 12V or 24V DC power supply. RS232 Interface definition 4.2.
2. The data transceiver cannot receive data which is more than the buffer capacity; 6. Operating mode E34-DTU(2G4D27) has four operating modes, if low power consumption is not required, normal communication is recommended to configure the data transceiver for the normal mode (mode 0);...
About us Technical support: support@cdebyte.com Documents and RF Setting download link: https://www.ru-ebyte.com Thank you for using Ebyte products! Please contact us with any questions or suggestions: info@cdebyte.com ------------------------------------------------------------------------------------------------------------ Web: https://www.ru-ebyte.com Address: B5 Mould Industrial Park, 199# Xiqu Ave, High tech Zone, Chengdu, Sichuan, China...
Need help?
Do you have a question about the E34-DTU and is the answer not in the manual?
Questions and answers