Related Manuals for Eureka Forbes Robo Lvac Voice Pro
Summary of Contents for Eureka Forbes Robo Lvac Voice Pro
- Page 1 User Manual of Intelligent Robotic Vacuum Cleaner Robo Lvac Voice Pro Please read this user manual carefully before use and keep it properly...
- Page 2 * If the user manual is missing, please contact your local dealer or call the after-sales service department to obtain an electronic user manual.! * Due to the continuous improvement of the product, the actual product shall prevail, and Eureka Forbes reserves the right to update the product.
- Page 3 Safety precautions for use * This product can only use the adapter, batteries and charging dock that are provided with this prod uct.Users shall not change the battery with out authorization, otherwise the product may be damaged. * If the host machine and accessories of this product are found to be damaged. Contact our after-sales service department.no one may dis assemble, repair or modify this product.
-
Page 4: Safety Instructions
Safety Instructions About the batteries 1. Only the batteries provided by the manufacturer are applicable to the product. 2. Before discarding the device, the battery must be taken out of the robotic vacuum cleaner. 3. Steps to take out the battery: A. - Page 5 Safety Instructions NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 6 Package InformationProduct Introduction Power adapter×1 Charging dock×1 MachineX1 User Manual of Intelligent Robotic Vacuum Cleaner Robo Lvac Voice Pro Eureka Forbes Please read this user manual carefully before use and keep it properly High-performance User manual×1 filter×1 Side brush×1 Mop holder ×1 Mopping cloth x 1 Cleaning brush×1...
-
Page 7: Product Introduction
Product Introduction Cleaning/On/Off button •Press once: start cleaning. •Press twice: start fixed-point cleaning. •Press and hold for 3 seconds: turn on/off the machine. *For the first use, toggle the main switch from O to I Recharge button. •Press once: return for recharge. •Press and hold for 15 seconds: restore factory settings. -
Page 8: Installation Instructions
Installation Instructions ① ② Install the charging dock Place the charging dock Connect the charging dock with the adapter. Place the charging dock on a flat hard ground Prevent the adapter wire from winding the perpendicular to a wall and keep it clear of machine during sweep. - Page 9 Product Introduction App Download And Network Operation ② Reset the network ① Download Search for Smart Life or Eureka Forbes Robo in Press and hold and the simultaneously till the mobile app store to download the APP. the voice prompts, wait ill the indicator starts blinking slowly in white, indicating that the machine enters pairing.
- Page 10 Operating Instructions Startup/shutdown For the first use, toggle the main switch from O to I, and the robotic vacuum cleaner will automatically turn on. Press and hold for 3 seconds to start it up. Press and hold for 3 seconds to shut it down. If the robotic vacuum cleaner fails to respond, toggle the main switch from I to O to forcibly turn off the device.
- Page 11 Operating Instructions Select suction intensity (only in-app operation supported) Select an sweep intensity in this app as required: *Quiet *Standard *Power *Max Remotely Controlled Sweep (only in-app operation supported) * Manual Remotely-Controlled Sweep is available in the app to make the machine go to the area to be cleaned.
- Page 12 Operating Instructions Selective Room Cleaning (only in-app operation supported) Select one or multiple rooms for cleaning in the app √A √B * The robot may enter unselected areas during cleaning. Clear obstacles from the ground around the selected rooms as the robot may enter unselected areas. * Area-specific Sweep can only be started after a map is created.
- Page 13 Operating Instructions B. Wet mopping setting You can start cleaning by selecting the cleaning mode, and the level of mopping water can be selected in the APP according to your needs. * When mopping the floor, to prevent the robotic vacuum cleaner from wetting the carpet, it is recommended to add a virtual wall (no mopping) to the carpet area in the APP to protect the carpet.
-
Page 14: Routine Maintenance
Routine Maintenance Clean the main brush 1 As shown in the following figure, press down the buckle to take out the protective cover, and take out the rolling brush upwards. 2 Clean the main brush with a cleaning tool. The blade can cut off the hair entangled on the main brush. - Page 15 Routine Maintenance Clean casters Hair or dust particles tend to be entangled around casters. Clean the them regularly or as needed. 1 Pull up casters to take them out. 2 Clean any hair or sundries entangled around casters or in any caster chamber. 3 Reinstall casters and push them in till they click into place Clean the charging dock In order to ensure optimum operating conditions, please clean charging electrode regularly, and...
-
Page 16: Common Faults
Common Faults When any abnormality occurs to the machine in operation, the power indicator will blink fast in red and voice prompt will be provided. Please consult the following table for troubleshooting. Fault Solution -Make sure that the main switch of the device is turned on. -Make sure that the host is powered on. - Page 17 List of Faults When any abnormality occurs to the machine in operation, the power indicator will blink fast in red and voice prompt will be provided. Please consult the following table for troubleshooting. Solution Voice Prompt • Please open the battery compartment and check whether the battery is properly connected, and Error 1: The battery is abnormal.
- Page 18 How to connect the app with your Mobile app...
- Page 19 Step 1: Go to apple store Search for Smart Life app Download the app Step 2 : Go to Play store Search for Smart Life app Download the app...
- Page 20 Step 2: Log in & Sign Up Details...
- Page 21 Step 3: Fill in your credentials for login. Fill in your email id and tick on the I agree privacy policy agreement and press on get verification code.
- Page 22 Step 4: Allow Permissions...
- Page 23 Step 5: Add Device Click on Click on Small Click on Robot add device Home Appliances Vacuum (Wi-Fi)
- Page 24 Go to your Product and begin : Pairing Mode Home BUTTON Power BUTTON Press & Hold The Home And Power Button Simultaniously Till The Voice Prompts, Wait Till The Indicator Start Blinkingslowly In White,indicate That The Machine Enters Pairing. Switch On The Main Button Of The Robo...
-
Page 25: Wifi Setting
Go back to Smart life App on mobile : To Configure the Wifi Setting Select Home Wifi Add Home Wifi Password Network If The Indicator Blinking Rapidly, Confirm And Go For Next Step... - Page 26 Go back to Smart life App on mobile : To Configure the Wifi Setting Product name can be changed Based on User Convenience Product Connected With Wifi Ready To Use...
- Page 27 5: Trouble Shooting : Reset the device If The Indicator Is Blinking Follow The Above Steps Slowly Click Of Reset Device Follow The Above Steps Follow The Above Steps...
- Page 28 5: Trouble Shooting : Reset the device LED Indication on the product: BLINKING SLOWLY IN WHITE: WAIT FOR CONNECTION BLINKING FAST IN WHITE: BEING CONNECTED TO WIFI NORMALLY ON IN WHITE: WIFI CONNECTED...
- Page 29 Know your Product: LVAC VOICE PRO CONNECT THE PRODUCT WITH THE EUREKA FORBES ROBO APPLICATION...
- Page 30 Know your Product: LVAC VOICE PRO CONNECT THE PRODUCT WITH THE APPLICATION...
- Page 31 Know your Product: LVAC VOICE PRO MODES AND OPTIONS Auto Home Zone Pin N GO Room...
- Page 32 Know your Product: LVAC VOICE PRO MODES Auto Mode: During Auto Mode Machine Map The Boundary First Then Start The Auto Clean Pin N Go: This Option For Selected Area Cleaning It Clean 2x2 Meter Square Area Around The Selected Point Room Option For Separate Room Cleaning...
- Page 33 Know your Product: LVAC VOICE PRO MODES ZONE This Option For Cleaning Particular Area In Squre Size. We Can Adjust The Size Of The Cleaning. Pin N Go, Room And Zone Are Can Not Operate While Machine Is Running.
- Page 34 Know your Product: LVAC VOICE PRO MAP SAVING AND EDITING...
- Page 35 Know your Product: LVAC VOICE PRO Click On The Option “More” Click On The “Mop Setting” Click On Thr “Save” Option Ensure That The Map Is Saved By Checking Display Will Show Your Map By A “Use Map Option”just Below The Saved Map.
- Page 36 Know your Product: LVAC VOICE PRO MAP SAVING AND EDITING Merge Room: To Merge Two Or More Rooms Divide Room: To Divide A Large Area As Per The Requirement Reset: Used To Clear The Last Action Order: Used To Arange Which Order You Want To Clean Custom Mode: To Prioritise The Cleaning...
- Page 37 Know your Product: LVAC VOICE PRO MAP SAVING AND EDITING Click The Merge Room Option Click On Divide Room Option Select A Single Area To Split Select Two Adjoining Zone By Draging Line To Merge Click Split Option Click Merge Rooms Click On Name The Room Option Choose Or Type Click On The Room...
- Page 38 Know your Product: LVAC VOICE PRO MAP SAVING AND EDITING Select The Custom Mode Click On The Order Option Select The Room Want To Clean Select In Which Order Want To Clean Select Suction Water Level And Time Click On Save Option Click On Confirm Option Reset Option For Reset The Very Last Action On Map...
- Page 39 Know your Product: LVAC VOICE PRO FORBIDEN AREA No-mop-zone: this Option Used To Select The Area There Is No Need Of Mopping No-go-zone: this Option Used To Select The Area Robo Does Not Want To Go To Rotate The Selected Area To Delete The Selected Area To Adjust The Size Of Selected Area Click On The Forbiden Option...
- Page 40 Know your Product: LVAC VOICE PRO OTHER OPTIONS...
- Page 41 Know your Product: LVAC VOICE PRO REMOTE CONTROL FIND ROBOT This Option Is Used To This Option Is Used To Control Robo Vac Like Remote Find Robo Vac Click On “More” Click On “More” Click On Remote Control Click On “Find Robot” Adjust The Direction Confirm The Instruction VOICE &...
- Page 42 Know your Product: LVAC VOICE PRO DO NOT DISTURB MAINTAINANCE In This Mode Robot Will Not This Option Will Show Perform Schedule And The Life Of Filter, Side Unfinished Cleaning Bresh And Main Bresh Automatically CLEANING HISTORY This Option Will Show The Time And Area Cleaned...
- Page 43 Know your Product: LVAC VOICE PRO Click On “Schedule Planing” Click On “Add” Select Which Day Want To Repeat The Same, Suction,water Level And Cleaning Position Click On “Save” Option...
- Page 44 Know your Product: LVAC VOICE PRO SUCTION & MOPPING SUCTION MOPPING HIGH POWER MEDIU STANDAR M HIGH D QUIT...
Need help?
Do you have a question about the Robo Lvac Voice Pro and is the answer not in the manual?
Questions and answers