Download Print this page

flexi SILHOUETTE SMALL 2 DOOR CABINET Manual

Advertisement

Quick Links

SILHOUETTE SMALL 2 DOOR CABINET
THIS PRODUCT MUST BE INSTALLED ON THE BOTTOM RUNGS OF YOUR SILHOUETTE LADDER FRAME OR STACKED
ON OTHER SILHOUETTE DRAWERS & CABINETS (MAXIMUM 2 UNITS HIGH)
.
This product requires two people to assemble.
CARE INSTRUCTIONS: We recommend to wipe over with a dry micro-fibre cloth to remove any dust.
Avoid using a damp or wet cloth and any cleaning chemicals as this may cause damage to the surfac
e.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the SILHOUETTE SMALL 2 DOOR CABINET and is the answer not in the manual?

Questions and answers

Summary of Contents for flexi SILHOUETTE SMALL 2 DOOR CABINET

  • Page 1 SILHOUETTE SMALL 2 DOOR CABINET THIS PRODUCT MUST BE INSTALLED ON THE BOTTOM RUNGS OF YOUR SILHOUETTE LADDER FRAME OR STACKED ON OTHER SILHOUETTE DRAWERS & CABINETS (MAXIMUM 2 UNITS HIGH) This product requires two people to assemble. CARE INSTRUCTIONS: We recommend to wipe over with a dry micro-fibre cloth to remove any dust.
  • Page 2: Parts List

    SILHOUETTE SMALL 2 DOOR CABINET ELEMENTS PARTS LIST x16pcs x1pc x6pcs x6pcs x12pcs x6pcs x8pcs x1pc x1pc x6pcs x24pcs x4pcs x2pcs x2pcs x4pcs x4pcs...
  • Page 3 SILHOUETTE SMALL 2 DOOR CABINET STEP 1 STEP 2 STEP 3...
  • Page 4 SILHOUETTE SMALL 2 DOOR CABINET STEP 4 STEP 5 STEP 6 If required, rotate the push-to-open latch to a suitable length.
  • Page 5 SILHOUETTE SMALL 2 DOOR CABINET STEP 7 STEP 8 Ensure your Unit is square by measuring from corner to corner. If measurement for XX and YY are the same, then secure your Unit with Corner Brackets (b) and Screws (a).
  • Page 6 SILHOUETTE SMALL 2 DOOR CABINET STEP 10.1 1. Please note that Cabinets and Drawers should be installed on the rungs of your Ladder Frame before installing Cross Braces. 2. When positioning Cabinets and Drawers side-by-side in your Silhouette system, we recommend installing your Units from left to right.
  • Page 7 SILHOUETTE SMALL 2 DOOR CABINET STEP 10.3 Ensure that the installed Unit is flush with the Ladder Frame. If required, adjust the positioning of the doors using the following steps: Once you have installed all Cabinets and Drawers on your Ladder Frames, you can secure your system with Cross Braces.