Download Print this page

MOEBE Standing Frame Assembly Instructions

Download this manual

Assembly Instructions / Standing Frame

Standing Frame

Standing Frame consists of two pieces of acrylic glass, four sides made of

either untreated wood or aluminium, and a rubber band.

Our frames are designed to fit most sizes of photos, prints or postcards,

and to accommodate different surface textures.

Due to variations in temperature and humidity, subtle changes in the

acrylic glass may cause your artwork to move in the frame. If this happens,

we suggest flipping the two pieces of acrylic glass inside out or using a

small piece of tape or neutral glue to hold your artwork in place. You can

also make your artwork thicker by placing an additional piece of paper

behind it.

Strandlodsvej 42a, 1 DK-2300 Cph S

(+45) 7174 7496, moebe.dk

Need help?

Do you have a question about the Standing Frame and is the answer not in the manual?

Page 1 Assembly Instructions / Standing Frame Standing Frame Standing Frame consists of two pieces of acrylic glass, four sides made of either untreated wood or aluminium, and a rubber band. Our frames are designed to fit most sizes of photos, prints or postcards, and to accommodate different surface textures.
Page 2 Assembly Instructions / Standing Frame Standing Frame To disassemble Standing Frame, Place the artwork between the pull one of the corners apart and two pieces of glass. remove the rubber band. Add three sides to the glass. Pull the rubber band around the sides.
Page 3 Assembly Instructions / Standing Frame Insert the last side to complete the frame. Strandlodsvej 42a, 1 DK-2300 Cph S (+45) 7174 7496, moebe.dk...