TABLE OF CONTENTS Overview........Page 3 PART I: SETUP App Setup........Page 4 Installation........Page 6 PART II: USAGE Page 11 Live and Saved Video....Page 11 Two-Way Audio......Page 12 Analytics and Deterrence....Page 13 Floodlight and Siren Control..Page 13 SD Card Continuous Recording..
Page 3
Installation: Mounting and configuring the Premium Floodlight Camera in your desired location In the box, you’ll find the Premium Floodlight Camera, Mounting Bracket, Power Adapter (assembly required), and accessories labeled for a “Standard Setup” and “Junction Box Setup”. The Standard Setup method and accessories are depicted in this manual.
PART I: SETUP APP SETUP To add the Premium Floodlight Camera to your Frontpoint system, you will need a mobile phone, a 2.4 GHz or 5 GHz Wi-Fi connection, and the password for your home Wi-Fi network. Follow the steps below: 1) Power on the Premium Floodlight Camera: •...
Page 5
• You will need to turn on the Local Network if your phone has it off. To turn on for Frontpoint, visit Settings, followed by Privacy & Security, and then Local Network. • You may also be directed to a “Wi-Fi Status” page, dependent on your mobile phone.
To complete the installation, please follow the instructions below: 1) Determine a mounting location: The Premium Floodlight Camera must be within 9.5 feet of a power outlet for the • cable to reach; pick a location that has an interior power outlet nearby since you’ll be routing the cable through the wall.
Page 7
3) At the outdoor mounting location, follow the below steps to mark the screw locations: • Hold the Mounting Bracket in the desired mounting location, oriented as shown. • Use a pencil to mark the two spots (#1 and #2) where the screws will go.
Page 8
You can allow the camera to hang from the Bracket while completing the next step but ensure the camera securely hangs before releasing it. 10) Connect the Premium Floodlight Camera’s built-in cable to the power cable that is routed through the wall. •...
Page 9
• If desired, install the cable clips as needed to secure the cable to wall. 17) Lastly, return to the Frontpoint app to complete the Configuration steps*; you will configure your preferences and rules for both the camera and lights.
Continuous Recording, so you always know what’s happening at home. VIEW LIVE AND SAVED VIDEO To view live and saved video from your Premium Floodlight Camera, follow the steps below: Tap “Video” on the home screen of the Frontpoint app.
ANALYTICS AND DETERRENCE While Video Analytics rules are encouraged to be created during the initial setup, they can be set up or modified at any time. When setting up a Video Analytics rule, you’ll be prompted to set up Perimeter Guard™ as well. Perimeter Guard™ functions as a proactive intruder deter- rence- automatically sounding a siren with flashing red and blue lights when a person within a set area and schedule is detected.
To manually trigger the floodlights, siren, or adjust the settings from the Frontpoint app, follow the steps below: 1. On the home screen of the Frontpoint app, find your camera under “Lights”. Tap the lightbulb icon with solid fill to turn the camera’s lights on or off.
LED is alternating between red and green. • WARNING: A factory reset will restore factory-default settings to the camera. If already installed, the camera may need to be removed from your Frontpoint system and re-added through the App Setup after the reset.
TROUBLESHOOTING If you’re having issues with either the setup or operation of the Premium Floodlight Camera, please scan the QR code below for answers to a range of questions such as: • How can I route the camera to an exerior outlet? •...
Need help?
Do you have a question about the PREMIUM FLOODLIGHT CAMERA and is the answer not in the manual?
Questions and answers