FILMOP TOTAL MOP Quick Start Manual

ASSEMBLY
STEP 1: Place swivel into
connector until holes line
up. The wider side of the
frame has to be on the side
of the silicone tube end.
STEP 2: Insert double pin
and use pliers to completely
snap together the double
pin.
USAGE / DISPENSING
SIDE PRESS
Short Burst of
Dispensing:
Press Trigger-Grip on
handle.
TOP BUTTON
Short Burst of
Dispensing:
Press down on the
knob at the end of
the handle.
TOTAL MOP
ASSEMBLY, USE & MAINTENANCE
CONTAINER PREP
Continuous Flow/
Open Position:
Press trigger-grip on
handle and press red
locking button down.
Continuous Flow/
Open Position:
Press knob down and
rotate clock-wise to
lock in place.
QUICK CHANGE MODEL:
1. Unscrew cap, fill container with
cleaning solution, replace cap and screw
back on to secure.
2. Line up tabs on bottom of container with
blue inserts on base and push down.
3. Twist counter-clockwise to secure.
4. Pull up top vent before using to assure
flow of solution.
ON BOARD MODEL:
1. Unscrew cap and pull cap up.
2. Fill On Board container with cleaning
solution by pouring through cap filter
liner. No need to remove the filter.
3. Return cap to top of container and
secure it.
Release continuous
flow/open position by
pressing trigger grip
again.
Release continuous
flow/open position
by turning top knob
counter clock-wise.