Advertisement
Induction Sealer
User Manual
(Manual NO.8310)
Model: USS-PHIS00005
This manual should be made available to all users of this
equipment. For best results, and for maximum durability of
the equipment, carefully read and follow all instructions.
For questions or concerns, e-mail service@ussolid.com, visit www.ussolid.com
Advertisement
Table of Contents
Related Manuals for U.S. Solid USS-PHIS00005
Summary of Contents for U.S. Solid USS-PHIS00005
- Page 1 Induction Sealer User Manual (Manual NO.8310) Model: USS-PHIS00005 This manual should be made available to all users of this equipment. For best results, and for maximum durability of the equipment, carefully read and follow all instructions. For questions or concerns, e-mail service@ussolid.com, visit www.ussolid.com...
-
Page 2: Table Of Contents
Table of Contents I. Applications II. Technical Specifications III. Operating Instructions IV. Matters Needing Attention V. FAQ VI. General Faults VII. Warranty... -
Page 3: Applications
I. Applications The USS-PHIS00005 induction sealing machine is designed to seal plastic, glass or non-metallic bottles and cup-shaped containers using the electromagnetic induction principle. It should not be used to seal metallic containers. This machine is widely used in the medical, chemical, food, beverage, grease, cosmetics and other industries. -
Page 4: Operating Instructions
III. Operating Instructions Machine Panel ON/OFF Plug the power plug in; the machine automatically enters the self-test state, Starting up the digital tube displays "---". Then, the display turns OFF, and after pressing the power switch button, the digital tube displays the parameter values of the machine from when it was last powered off, such as "3.15". - Page 5 Diameter: 1.89"(48 mm) - Sealing time: 1.2 seconds Diameter: 2.76"(70 mm) - Sealing time: 0.6 seconds Diameter: 3.15"(80 mm) - Sealing time: 0.4 seconds Insert the aluminum foil gasket into the bottle cap, and place the aluminum foil Trial Sealing silver side outward.
-
Page 6: Matters Needing Attention
on. When the machine is turned on again, it will still display the last parameters, including the output power and sealing time. The material of the packaging container may be PE, PP, PET, PS, ABS, Glass and Choose Correct Material so on. -
Page 7: Faq
During the sealing operation, the center of the object to be sealed should be aligned with the center of the sensor head to ensure sealing quality. Properly adjust the separation distance between the induction head and the aluminum foil, and the induction current can be adjusted in small amounts. -
Page 8: General Faults
The machine has a 1 year warranty. This warranty covers any defects in material or workmanship under normal use. Within 30 days from the date of delivery, U.S. Solid will either work with you to get your product working with the use of replacement parts, replace the product after receiving the returned defective machine, or accept a return for a full refund.
Need help?
Do you have a question about the USS-PHIS00005 and is the answer not in the manual?
Questions and answers