Download Print this page

Epcom PROAUDIO SF600W User Manual

Advertisement

Quick Links

To our respectable customers
Thank you for purchasing this SF-600W Ceiling Pendant
Speaker.
Follow the instructions in this manual to get the best results from this unit.
We also recommend that you keep this manual handy for future reference.
Safety Tips
Read the instructions in this section carefully before using it.
Be sure to follow the instructions in this manual as it includes descriptions of
safety symbols.
We recommend that you keep this instruction manual handy.
Security Symbol and Message Description
The safety symbols and messages described below are used in this manual to
prevent bodily injury and property damage that could result from mishandling.
Please understand the potential safety symbols and messages.
Potentially dangerous if mishandled, could result
Warning
in death or personal injury.
When Installing Speakers
Do not allow the speakers to be exposed to direct sunlight, rain or fluids, it
may cause a short circuit or fire.
Must adhere to speaker specifications. Excessive high voltage may cause
electric shock or fire. Do not cut, deform or replace damaged cables.
Avoid instability and set up speaker installation such as ceiling shake.
Avoid dropping the speaker as it may cause personal injury or property damage.
Speaker stands will be installed to support the weight of each of the speakers.
Avoid swapping speakers, personal injury or property damage may result.
Do not connect the terminals with wet hands to avoid electric shock.
If you need to disconnect the wiring, pull it from the connector, and never pull it
from the cable as it can damage it and generate false contacts and/or short circuits.
Never block the ventilation slots, it can cause excessive heating which can melt
the insulation and start a fire.
Avoid installing the speakers in places exposed to moisture, vapors, dust, direct
sunlight, heat sources or smoke, it may cause a fire.
Pendant Loudspeaker
SF600W
User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the SF600W and is the answer not in the manual?

Questions and answers

Summary of Contents for Epcom PROAUDIO SF600W

  • Page 1 If you need to disconnect the wiring, pull it from the connector, and never pull it ● SF600W from the cable as it can damage it and generate false contacts and/or short circuits. Never block the ventilation slots, it can cause excessive heating which can melt ●...
  • Page 2 SF600W 60W,30W,20W,15W,10W,7.5W (Figure) Power Taps@100V The passage of the SF600W is 3.4 Hang the loudspeaker on the hook Attach the three wires secured to the holes to support the Kg, the installation must be carried with the open eye attached to the fake pendant speaker, as shown in the figure.