Porodo Lifestyle PD-LFST126 Manual
![]()
Product Overview
![Porodo - Lifestyle PD-LFST126 - Product Overview Product Overview]()
- Cool Head
- Detachable Spiral Curler Attachment (30mm)
- Unlocking Button
- Power Switch and Temperature Regulation (105,80,55°C)
- Hinged Rear Filter
- Hanging loop
- Blower Head
- Curler Brush
- Multi-function Brush
Operation Instruction
Settings
Your appliance offers the following temperature setting options:
0: Off
1: Moderate temperature for gentle drying and styling
2: High temperature for fast drying and styling
3: Highest temperature for fast drying and styling
Using the Attachments
- Spiral Comb (for hair curling)
- Ensure that the attachment and the unlocking button are aligned.
- Rotate the attachment clockwise until you hear a "click" sound.
- To remove, press the unlocking button and rotate the attachment counter-clockwise before pulling it out.
- Blow Brush (for creating side waves)
- The Tension Comb enhances hair catching capabilities.
- To use the Tension Comb, firmly place the hair into the brush.
- Roller Brush
- Divide your hair into sections, then wind each lock around the round brush.
- To untwist the lock, press the button located above the operation switch.
- Do not comb the hair immediately after curling; let it cool down first.
Using the Dryer
- Check if the mains voltage on the type plate (located on the handle of the appliance) matches your local power supply.
- Towel dry your hair thoroughly after washing.
- Plug the power cord into the wall socket.
- Turn on the appliance using switch and set the desired temperature level.
- If needed, you can switch to cold air by turning switch D to the "1" position (cold air setting).
- After use, turn off the appliance with switch and unplug the power cord from the wall socket.
Note: The cold air setting interrupts the hot air operation and provides a cool air flow, helping you set your hairstyle more effectively and lastingly.
![]()
Never wind the power cord around the appliance, as this can cause damage. - Regularly check the power cord and
Cleaning and Storage
- The appliance can be cleaned with a dry cloth.
- The attachments can be cleaned with a moist cloth or rinsed under running water.
- Remove the attachments from the appliance before cleaning.
- Ensure the attachments are dry before using or storing them.
- Never rinse the appliance with water.
- When not in use, always unplug the appliance.
- Allow the appliance to cool and store it in a dry location.
- Never wrap the cord around the appliance, as this will cause the cord to wear out prematurely and break.
- If the power supply cord of the appliance becomes damaged, the appliance must be replaced by returning it to the retailer or a similarly qualified person to avoid a hazard.
Specifications
Input | AC 220 to 240V, 60/50Hz |
Rated Power | 600W |
Power Plug | UK 3-Pin Plug |
Cord Length | 1.8m |
Spiral Curler Size | 30mm |
Spiral Curler Size | 30mm |
Temperature Control | 3 Settings |
Product Weight | 318.3g |
Product Size | 232×42.7×47.5mm (without Comb) |
Model Number | LFS126 |
Warranty
Products that you buy directly from our Porodo website or shop come with a 24-month warranty.
When you buy Porodo products from any of our approved sellers, you only get a 12-month warranty. If you want to extend this warranty, go to our website at porodo.net/warranty and fill out the form with your information.
For more info, please check: porodo.net/warranty
If you have any questions about this Privacy Policy, please contact us at:
info@porodo.net
Website: porodo.net
Service Support: support@porodo.net
Instagram: porodo
Safety Precautions
- Before first plugging the unit into an outlet, ensure that the voltage indicated on the rating label matches the voltage of your home.
- If the power cord is damaged, it must be replaced by the manufacturer or a qualified service agent to avoid a potential hazard.
- When using the hairdryer in a bathroom, always unplug it after use, as the proximity to water presents a risk even when the hairdryer is switched off.
- For additional protection, it is recommended to install a residual current device (RCD) with a rated residual operating current not exceeding 30 mA in the electrical circuit supplying the bathroom. Please consult your installer for further advice.
![]()
Do not use this appliance near bathtubs, showers, basins, or other containers that hold water. - The hairdryer should only be used for the purposes outlined in this instruction manual.
- This appliance can be used by children aged 8 years or older, as well as individuals with reduced physical, sensory, or mental capabilities or a lack of experience and knowledge, only if they are supervised or instructed on how to use the appliance safely and understand the risks involved.
- Children should not play with the appliance. Cleaning and user maintenance should not be performed by children unless.
- Do not use the appliance outdoors.
- Always unplug the hairdryer from the power supply when not in use and before cleaning.
- To protect against the risk of electric shock, do not immerse the appliance in water or any other liquids.
- Do not use aerosol products while the hairdryer is in operation.
- Never leave the hairdryer switched on when it is not in use.
- Do not use attachments other than those supplied with the appliance.
- The air inlet and outlet openings should never be obstructed to prevent overheating.
- If the airflow is inadvertently blocked during use, the built-in thermal safety cut-off will automatically turn off the appliance. The hairdryer will restart automatically after cooling for a few minutes.
- Keep your hair away from the immediate vicinity of the inlet opening to prevent it from being drawn in.
- Store the appliance in a cool, dry place. Do not use it if your hands are wet.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Porodo Lifestyle PD-LFST126 Manual
Need help?
Do you have a question about the Lifestyle PD-LFST126 and is the answer not in the manual?
Questions and answers