Summary of Contents for TVT Digital TD1104D
- Page 1 HD Decoder User Manual Please read this instruction carefully before operating the unit and keep it for further reference...
- Page 2 HD Decoder User Manual Notes Please read this user manual carefully to ensure that you can use the device correctly and safely. There may be several technically incorrect places or printing errors in this manual. The updates will be added into the new version of this manual. The contents of this manual are subject to change without notice.
-
Page 3: Table Of Contents
HD Decoder User Manual Contents Introduction ........................1 Summary ........................1 Features ........................1 Front-panel Descriptions ..................... 2 Real-panel Descriptions ....................2 Login ........................... 4 Device Configuration via Web ................... 5 Video Settings ......................5 3.1.1 Video Management ....................5 3.1.2 Video Group Settings ..................... -
Page 4: Introduction
HD Decoder User Manual 1 Introduction 1.1 Summary The decoder is a 4-channel professional decoder, which adopts high-performance SOC decoding chip. It not only supports multi-channel standard-definition and high-definition network videos decoded on TV wall independently (in device running mode), but also it can be managed in an integrated way by video surveillance management platform (in platform running mode). -
Page 5: Front-Panel Descriptions
HD Decoder User Manual Provide HTTP API protocol to third-party platform Support platform running mode and device running mode Operation and Maintenance Support device search Support WEB client access, configuration and management Support time zone, time and date settings ... - Page 6 HD Decoder User Manual Number Description RS485 interfaces (currently no function) 8CH alarm output (currently no function); Relay output. Connect to external alarms. 8CH alarm input (currently no function) Connector for audio output (used for two-way talk) Connector for audio input (used for two-way talk) Audio output ×...
-
Page 7: Login
HD Decoder User Manual 2 Login The login settings are as follows. ① Make sure the PC and decoder are connected to the LAN. ② Get the IP-Tool from the supplier and then install it on your computer. ③ Run the IP-Tool. Then the decoder can be searched. If the decoder can’t be searched, please check whether the PC and the device are connected to the network or not. -
Page 8: Device Configuration Via Web
HD Decoder User Manual 3 Device Configuration via Web 3.1 Video Settings 3.1.1 Video Management Go to Video SettingsVideo. There is a local video output by default. Videos can be quickly add or manually add through the above interface. Quickly Add: Click [Quickly Add] to search video devices (like IPC, DVR, NVR, etc.) in the same local network. -
Page 9: Video Group Settings
HD Decoder User Manual Modify the information of a video device: Click behind the channel number to change the IP address, channel number, username and password. Delete videos: Click to delete the added videos. 3.1.2 Video Group Settings Go to Video SettingsVideo Group. Then click to assign channels for the desired group. -
Page 10: Decoding Settings
HD Decoder User Manual Enter the group name, select the dwell time and then check videos. After that, click [OK] to save the settings. Click to modify the added group; click to delete the added group. 3.2 Decoding Settings Please refer to Basic Settings for user permission setting. 3.2.1 Open Window Go to the decoding settings interface. - Page 11 HD Decoder User Manual For the drawn window, you can drag it to anywhere and zoom in/out it as needed by dragging the four sides of the window. Directly drag a video to the output window to create a window that fits to the output window by default.
-
Page 12: Decoding Operation
HD Decoder User Manual 3.2.2 Decoding Operation Decoder Input: Input the video source through HDMI IN interface in the real panel and then drag HDMI-IN0 to a window to bind the HDMI-IN0 and the monitor in the decoder settings interface as shown below. -
Page 13: Plan Settings
HD Decoder User Manual Exit Full Screen: Right click on the full screen window to select “Exit Full Screen” and then the window will restore to its original status. Main Stream/Sub Stream: The main/sub stream can be switched by right clicking on the window which is decoding video. -
Page 14: Output Settings
HD Decoder User Manual Click a plan to quickly call up this plan. Choose the time and then click to view these plans in sequence. 3.3 Output Settings Go to Output SettingsOutput interface as shown below. Drag the output in the right output list to the window so as to bind the output to the window. If the decoder is set as “Master”... -
Page 15: System Settings
HD Decoder User Manual 3.4 System Settings 3.4.1 Device Information Go to System SettingsDevice Information interface. In this interface, device information can be viewed here, like MAC address, device type, software version and so on. 3.4.2 Basic Information In the basic settings interface, the user permission, device name, display and window settings can be set up. -
Page 16: Time Settings
HD Decoder User Manual To upgrade the decoder, please go to System SettingsSystem Maintenance interface. Click [Browse] to select the path of the upgrade files and then click [Upgrade] to upgrade the decoder. Please do not disconnect the device when upgrading. And the device will reboot automatically after finishing upgrading. -
Page 17: Affiliation Settings
HD Decoder User Manual IP Address: It must be in the same local network segment as the IP address of the computer used to log in the web client. Subnet Mask: The default value is 255.255.255.0. Gateway: It must be the same with the gateway of the computer used to log in the web client. Data Port: The default number is 8888. -
Page 18: Https Configuration
HD Decoder User Manual the added decoder. In this interface, you can view the status of the added decoder, including “online”, “offline”, etc. Note : The added general decoders cannot add other general decoders. The master decoder cannot be added to other master decoders. The added general decoder which is working cannot be added to other master decoders. -
Page 19: Alarm Settings
HD Decoder User Manual 3.5 Alarm Settings Go to System SettingsAlarm. Alarm Input Setting: Enable an alarm input, set holding time and check “Config” to select the linkage output. to add. Then click “OK” to save the settings. ② Check the desired output and click ③... -
Page 20: Log
HD Decoder User Manual Alarm Test: After setting sensor input and the corresponding output, use one end of the wire contact the GND interface of the decoder and use the other end of the wire to contact the alarm in interface of the decoder, the sensor output of the decoder will trigger alarms. - Page 21 HD Decoder User Manual Username: The default username is “admin”. Current Password: The default password is “123456”. It is necessary for you to set your new password here if this is your first login. Click to change the password. Next time, you can use your new password to log in. Click [Add] to add a new user as needed.
-
Page 22: Connect To Platform
HD Decoder User Manual 4 Connect to Platform Only when the decoder is set to master user permission, can it be connected by a surveillance platform. Here we will introduce how to connect to NVMS as an example. Switch the decoder user permission to “Master” and then add the general decoders as needed (See Affiliation Settings for details). - Page 23 HD Decoder User Manual In the above interface, select “Decoder” and then click [Add] to add decoders. Go to TV Wall Management interface. Add a TV wall and then bind the decoder to it. Then check the connection status of the decoder. If the decoder is added successfully, the online status will appear.
Need help?
Do you have a question about the TD1104D and is the answer not in the manual?
Questions and answers