creative
grids
®
NON-SLIP
The Original
Ruler
NON-SLIP
NON-SLIP
Multi-Size 2 Peaks in 1
Multi-Size 2 Peaks in 1
6" Triangle
6" Triangle
Multi-functional Turn-a-Round tool to
cut triangles within a square and half
rectangles up to 6" finished size.
Designed By: Rachel Cross
#CGR2P1
#CGR2P1
Made in USA
Made in USA
How to use this Ruler
Tip 1:
Take a look at the smaller of the two triangles; the bottom
right hand corner is cut off at an angle. Nip off this corner
prior to pinning your pieces together if you wish. This will
help with lining up your pieces when sewing.
Cut Off Corner
Tip 2:
Always use a scant ¼" seam throughout.
Cutting the larger (center) triangle
(e.g. finished size 4").
Along the center of the triangle are two indicators one
says (Fabric Width) and the other says (Finished Size).
Non-Slip Multi-Size
2 Peaks in 1 6" Triangle
SEE A DEMO
SEE A DEMO
SCAN WITH ANY
SCAN WITH ANY
QR READER
QR READER
CGR2P1
Designed by
Rachel Cross
creative
NON-SLIP
The Original
Creative Grids ® USA, Inc.
400 W. Dussel Dr. Ste B,
Maumee, OH 43537
www.creativegridsUSA.com
1. Choose finished size (height) of triangle from 1" to
6". This size is indicated on the right hand side of the
triangle with a black spot (ie. 4").
CGR2P1
Non-Slip Multi-Size
2 Peaks in 1 6" Triangle
2. Now follow this line to the left to see what size the
indicator says to cut your strips. In this case it says
(4½" strips).
3. Cut strips to chosen width.
4. Lay the center (larger) triangle along this strip
ensuring the flat top of the center triangle lines up
with the top edge of fabric and the base of the fabric
lines up with the (4½" strip) - - - - - dashed line.
Cut along each side of the triangle rotating through
180 degrees (do not turn it over) until you come to the
end of your strip each time lining up the edge of the
triangle with your last cut.
grids
®
Ruler
Creative Grids ® UK, Ltd.
Unit 23A Pate Road
Leicester Road Industrial Estate
Melton Mowbray
Leicestershire, LE13 ORG England
www.creativegrids.com
4 " line
Designed by
Rachel Cross
Need help?
Do you have a question about the CGR2P1 and is the answer not in the manual?
Questions and answers