The Rock
3-Way Panhead Monopod
Congratulations on selecting your new Monopod! In order to
achieve optimum performance, please follow instructions for
proper use and care.
PRODUCT SPECIFICATION
Head Type:
Leg Sections:
Maximum Height:
Maximum Tube Diameter:
SETTING UP MONOPOD
1. To use with feet: Fold down rubber feet in order
to open leg locks. Rubber feet will click into
place (Fig. 1). To use Handheld: Squeeze lock
tabs inward on rubber feet and fold up (Fig. 2).
Tripod
3-Way fluid Panhead
1 Leg + 3 Rubber Feet
57.4"
26mm
Maximum Load:
Features:
IMPORTANT
• Do not exceed maximum load capacity of the
monopod.
• Do not mount optic to monopod until leg is securely
locked, level and stabilized.
• Make sure all panhead locks are tightened securely
before mounting any optic.
• Do not overtighten locks as this may damage the
locking mechanisms.
• Make sure optic is securely fastened to quick
release plate before mounting to monopod.
• Do not carry the monopod by the panhead.
• Remove optic before adjusting or transporting
your monopod.
• Always store monopod in carrying case when not
in use.
2. Extend leg to desired height
and close locks to secure in
place (Fig. 3).
TR-500
5.5 lbs
Quick release plate, bubble level,
wrist strap, padded grip, Anti-Slip
locking rubber feet, carrying case
3. Screw Tilt/Pan Handle
to panhead (Fig. 4).
Need help?
Do you have a question about the The Rock TR-500 and is the answer not in the manual?
Questions and answers