Charging The Nicd Battery - FUTABA T4YBF Manual

The transmitter and receiver nicd batteries can be charged simultaneously or inde-
pendently.

Charging The Nicd Battery

1
Connect the charger transmitter connector to the transmitter charg-
ing jack and the charger receiver connector to the receiver servo nicd
battery.
2
Connect the charger to an AC outlet.
3
Check that the charging LED light.
4
At the end of charging, disconnect the charger from the AC outlet.
WARNING
Never plug the special charger into an AC outlet other than specified.
If the charger is plugged into an AC outlet other than specified, overheating, sparking, etc,
may cause burns, fire, etc.
Use the special charger, or digital proportional R/C quick charger, sold
separately to charge the digital proportional R/C nicd battery.
Overcharging will cause burns, fire, injury, or blindness due to overheating, breakage, elec-
trolyte leakage, etc.
CAUTION
When not using the nicd battery charger, disconnect it from the AC outlet.
16
Charging The Nicd Battery