Advertisement
ACM4 Series
Access Power Controllers
Installation Guide
Models Include:
ACM4
- Four (4) Fuse Protected Outputs
ACM4E
- Four (4) Fuse Protected Outputs w/Enclosure
ACM4CB
- Four (4) PTC Protected Outputs
ACM4CBE
- Four (4) PTC Protected Outputs w/Enclosure
Rev. 082808
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
More than just power.
TM
Advertisement
Table of Contents
Summary of Contents for Itronix ACM4 Series
- Page 1 ACM4 Series Access Power Controllers Installation Guide Models Include: ACM4 - Four (4) Fuse Protected Outputs ACM4E - Four (4) Fuse Protected Outputs w/Enclosure ACM4CB - Four (4) PTC Protected Outputs ACM4CBE - Four (4) PTC Protected Outputs w/Enclosure More than just power.
-
Page 2: Specifications
• Four (4) Access Control System trigger inputs: a) Four (4) normally open (NO) inputs. b) Four (4) open collector sink inputs. c) Any combination of the above. - 2 - ACM4 series Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com... -
Page 3: Installation Instructions
When using AC Listed Access Control Power Supplies polarity need not be observed. Note: For UL compliance the power supplies must be UL Listed for Access Control Systems and accessories. ACM4 series - 3 Available from A1 Security Cameras... -
Page 4: Typical Application Diagram
ELECTROMAGNETIC must be removed. DOOR HOLDERS (ACM4 and ACM4E only) MAG. LOCK Keep power limited wiring separate from non-power limited. Use minimum .25" spacing. LED1 LED2 ACM4CB - 4 - ACM4 series Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com... -
Page 5: Maintenance
FACP output circuit (Fig. 3 through 7, pg. 6). FACP INTERFACE Form “C” relay contact rated @ 1A/28VDC for alarm reporting. NC, C, NO (This output has not been evaluated by UL). ACM4 series - 5 Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com... -
Page 6: Hookup Diagrams
(This output has not been evaluated by UL) N.C. RESET SWITCH N.C. DRY TRIGGER INPUT N.C. TRIGGER INPUT JUMPER JUMPER Note: Keep power-limited wiring separate from non-power limited. Use minimum 0.25” spacing. - 6 - ACM4 series Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com... - Page 7 (50.8mm) 2” (50.8mm) 8.125” (206.375mm) 1” 1” (25.4mm) (25.4mm) 6.05” 0.6” 0.6” 1.25” (153.67mm) (15.24mm) (15.24mm) (31.75mm) 3.5” (88.9mm) 1” (25.4mm) 1” 5.25” 1” (25.4mm) (133.35mm) (25.4mm) ACM4 series - 7 Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...
-
Page 8: Enclosure Dimensions
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 web site: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty | Made in U.S.A. IIACM4/ACM4CB series H08Q MEMBER - 8 - ACM4 series Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...
Need help?
Do you have a question about the ACM4 Series and is the answer not in the manual?
Questions and answers