imarflex QGP-3807 Quick Start Manual

NOTE: The weight regulator will rotate and stop after a few seconds, then
rotate again. This cycle will continue until the cooking time is complete.
5. Once the required cooking time is reached, turn off the heat. Tilt the weight
regulator to release the pressure inside. If the pressure indicator and the
locking indicator return to their proper positions (down), it means the
pressure has been released.
If the pressure is clogged, try the following: a. Bring the pressure cooker to
the faucet, allowing water to flow over the cover until the pressure indicator
drops. b. Using a spoon, gently push the gasket on the side hole of the cover
until the pressure is released.
6. To open: Hold the lower handle with your left hand and the upper handle with
your right hand. Slightly turn the upper handle to the right until the two arrow
marks on the pressure cooker body and lid align. Lift the lid to open.
FOR EASY STORAGE
CLEANING AND MAINTENANCE
1. All parts are washable with soap and water.
2. Nozzle and Filter: After every use, clean the nozzle and filter with a cleaning
needle to remove food residue.
3. Safety Valve and Pressure Indicator: Unscrew, soak in hot water with soap
for 5 minutes, and rinse thoroughly. If food residue clogs the holes, use a
cleaning needle to remove it.
4. Gasket:
Soak in hot water with soap for 5 minutes and rinse thoroughly. Do not hang
the gasket. Place it back in the side slot on the cover of the pressure cooker.
5. Let all parts dry completely. Be sure to assemble the parts correctly,
especially the gasket.
6. Store in a dry place.
7. Always keep the pressure cooker clean after every use.
REMINDER: Please do not forget to register your product warranty through the
warranty registration website at https://imarflex.ph
Distributed By: Topgadget Distributions, Inc.
2120 A. Linao St. Malate, Manila
Made in China