Red Arrow SENTRY/STD Installation Instructions

PRODUCT: SENTRY ADJUSTABLE STAND FOR LED ENTRY
PRODUCT CODES: SENTRY/STD
INSTALLATION INSTRUCTIONS -
PANEL FIXTURE INSTALLATION
1. ASSEMBLE THE X BRACKET WITH THE SMALL BRACKET
USING SCREWS AND NUTS.
2. SCREW TOGETHER AS SHOWN.
3. MOUNT THE ASSEMBLED BRACKETS TO THE STAND WITH
THE SCREWS AND NUTS PROVIDED.
4. RAISE STAND TO REQUIRED HEIGHT, TIGHTEN THE
KNURLED SCREW AND INSERT THE SAFETY ROD.
5. THE STAND IS NOW COMPLETE AND READY TO ACCEPT THE
PANEL.
2
4
PAGE 4 ( BACK PAGE )
INSTALLATION INSTRUCTIONS
MANAGEMENT PANEL
Red Arrow Electrical Distribution
Cortonwood Drive, Brampton,
Barnsley, S73 0UF
1
3
5
T: 0800 195 0006
sales@redarrowelectrical.co.uk
redarrowelectrical.co.uk