Advertisement
Quick Links
REMOTE CONTROL RC2302
REMOTE CONTROL FUNCTIONS:
Note: If the treadmill does not respond to the remote control, you will need to resync the
treadmill and remote control. To sync the remote control with the treadmill, press the start/pause
button on the remote control, turn on the square switch at the same time and hold on the
start/pause button for five seconds, and you will listen a "di" sound that means the remote
control have resynced with the treadmill.
1. START/PAUSE BUTTON: Press the START button, so that treadmill begins running. 0.5 MPH (Miles
per hour) is the default start speed. During exercise, you also can press this button to pause the
machine.
2. SPEED +/– BUTTONS: Press the +/- buttons to increase or decrease the speed in increments of 0.1
MPH (Miles per hour). Pressing and holding either of these buttons for a duration of over ½ a second
will increase or decrease the speed continually.
3. INCLINE +/– BUTTONS: Press the +/- buttons to increase or decrease the incline in increments of
1. Pressing and holding either of these buttons for a duration of over ½ a second will increase or
decrease the incline continually.
*NOTE: The maximum speed on this treadmill is 3.7 MPH.
USER MANUAL
Advertisement
Summary of Contents for Sunny Health & Fitness RC2302
- Page 1 REMOTE CONTROL RC2302 USER MANUAL REMOTE CONTROL FUNCTIONS: Note: If the treadmill does not respond to the remote control, you will need to resync the treadmill and remote control. To sync the remote control with the treadmill, press the start/pause button on the remote control, turn on the square switch at the same time and hold on the start/pause button for five seconds, and you will listen a “di”...
- Page 2 BATTERY INSTALLATION & REPLACEMENT BATTERY INSTALLATION: 1. Remove the battery cover. 2. Take out the 1pc CR2032 battery that is included inside the remote control box. 3. Install the battery into the battery holder with the positive end facing up. 4.
- Page 3 INSTALLATION ET REMPLACEMENT DE LA BATTERIE INSTALLATION DE LA BATTERIE: 1. Retirez le couvercle de la batterie. 2. Retirez la pile CR2032 (1 pièce) qui se trouve dans le boîtier de la télécommande. 3. Installez la pile dans le support de pile avec l'extrémité positive vers le haut. 4.
- Page 4 Model:RC2302 Product name: REMOTE CONTROL RC2302 Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) and Part 15 of the FCC Rules.
Need help?
Do you have a question about the RC2302 and is the answer not in the manual?
Questions and answers