Ryvyr MALAGO SC-MALAGO-20BK Installation Instructions

BEFORE YOU BEGIN
• Observe all local plumbing and building codes.
• Follow these instructions only if it applies to your installation.
• Before installation, carefully inspect the vanity top for damage. Return the vanity top to its packaging until you are ready to install it.
• These instructions contain important care and cleaning instructions. Please review these instructions carefully.
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver
VANITY TOP AND INSTALLATION
CAUTION! Risk of product damage. Do not use plumbers putty or oil-based sealers with this
vanity top. These products will stain the surfaces permanently.
1
Apply a continuous bead of quality sealant
to the top surface (rim) of the sink.
3
Secure the sink to the top using the mounting kit / hardware provided by the countertop manufacturer.
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
Silicon Sealant Tape Measure
2
Turn the stone top upside down and place it on a
clean, scratch resistant surface. Center the sink over
the cutout.
INSTALLATION INSTRUCTIONS
MALAGO
CORNER VANITY TOP
SC-MALAGO-20BK / SC-MALAGO-20DE
Safety Glasses
TM