Subscribe to Our Youtube Channel
Related Manuals for Sentera Controls SATD1
Summary of Contents for Sentera Controls SATD1
- Page 1 SATD1 DIN RAIL SAFETY AND ISOLATING TRANSFORMER Mounting and operating instructions...
-
Page 2: Table Of Contents
INTENDED AREA OF USE TECHNICAL DATA STANDARDS WIRING AND CONNECTIONS MOUNTING INSTRUCTIONS IN STEPS VERIFICATION OF INSTALLATION INSTRUCTIONS TRANSPORT AND STORAGE WARRANTY AND RESTRICTIONS MAINTENANCE MIW-SATD1-EN-000 - 22 / 08 / 2022 2 - 7 www.sentera.eu back to the table of contents... -
Page 3: Safety And Precautions
In case there are any questions that are not answered, please contact your technical support or consult a professional. MIW-SATD1-EN-000 - 22 / 08 / 2022 3 - 7 www.sentera.eu... -
Page 4: Product Description
DIN RAIL SAFETY AND ISOLATING TRANSFORMER PRODUCT DESCRIPTION SATD1 series are compact single-phase safety isolating transformers designed for T35 DIN-rail mounting. ey provide safe electrical isolation of the input and output. ey are also suitable for creating SELV and PELV circuits because of the limitation on the output voltage. -
Page 5: Standards
2,5 mm MOUNTING INSTRUCTIONS IN STEPS Before you start mounting the SATD1 transformer, read carefully “Safety and Precautions” and follow these steps: Slide the unit along the guides of a standard 35 mm DIN rail and secure it to the rail by means of the black locking clip on the enclosure. - Page 6 Example Supply voltage 230 VAC ±10 % / 50—60 Hz Secondary side 24 VAC DSxx RSxx/RXxx SIO-RMxx DTA-G/XX SPS/SPSP STECxx MIW-SATD1-EN-000 - 22 / 08 / 2022 6 - 7 www.sentera.eu back to the table of contents...
-
Page 7: Verification Of Installation Instructions
In case of heavy pollution, clean with a non-aggressive product. In these circumstances the unit should be disconnected from the supply. Pay attention that no fluids enter the unit. Only reconnect it to the supply when it is completely dry. MIW-SATD1-EN-000 - 22 / 08 / 2022 7 - 7 www.sentera.eu...
Need help?
Do you have a question about the SATD1 and is the answer not in the manual?
Questions and answers