Erich Jaeger 361040 Operating Instructions

Hand Crimping Tool Operating Instructions (4 Notch)
Applicable Part Numbers: 361040, 361049, 361050, 361057 and 361059
1. Application
The hand-crimping tool has been configured for closed, solder-free 4-notched crimps according
to standard EN 60352-2 and for working with ERICH JAEGER crimp contacts with the stranded
wire.
2. Characteristics
The hole diameter and the outer diameter of our crimp contacts are matched to the 4-notched
crimping depending on the cable diameter. Only the cable diameters given in the drawings may
be used with the respective crimp contact.
We do not accept liability for the use of other cross-sections and other crimping forms.
The contact type defines the stop bush to be used.
Crimp Included Stopper
Tool Bushes (Except 361057)
361040 026129 - Pins/Sleeves
361049 025649 - Pins
361050 025647 - Sleeves
361059 025639 - Pins/Sleeves
361057 No Bushes Included
Order Separate:
038240 - Pins
038243 - Sleeves
ERICH JAEGER ASIA PACIFIC
Cable Diameter
(mm)
4.0 Classic
3.5
3.5
5.0
4.0 Basic
WWW.ERICH-JAEGER.CO.NZ
System Applicable Connections
ABS-EBS/24V (ISO 7638-1)
ABS-EBS/12V (ISO 7638-2)
15P/24V (ISO 12098)
13P/24V (Similar to ISO
12098)
13P/12V (ISO 11446)
13P/24V (Similar to ISO
11446)
13P/12V (ISO 11446)
13P/24V (Similar to ISO
11446)
3P/6-24V (DIN 9680)
ABS-EBS/24V (ISO 7638-1)
ABS/12V (ISO 7638-2)
15P/24V (ISO 12098)
1 / 2