HUBBELL LIGHTING wiHUBB Installation Instructions

wiHUBB® Occupancy Sensors
Installation Instructions
Hubbell Building Automation
9601 Dessau Road  Building One  Suite 100
Austin, TX 78754
Toll Free: 888-698-3242  Fax: 512-450-1215
www.hubbell-automation.com
DESCRIPTION
Hubbell Building Automation's wiHUBB Ceiling Mount and Wall Mount Occupancy Sensors combine ultrasonic
(US) and passive infrared (PIR) technologies to turn lighting on and off based on occupancy. These dual
technology sensors provide accurate turn-on while virtually eliminating false-offs. The sensors feature Hubbell
Building Automation's patented IntelliDAPT® technology, which makes all the sensor adjustments automatically.
Throughout the product's lifespan, smart software analyzes the controlled area and makes digital adjustments to
sensitivity and timer settings. Occupancy sensors with IntelliDAPT provide a maintenance-free "Install and
Forget" operation.
SPECIFICATIONS

Power Requirements: Powered by wiHUBB Smart Pack SmartPORT using plenum rated SmartPORT plug and
play cables for wiHUBB Occupancy Sensors (sold separately)

IntelliDAPT® self-adaptive technology

All-digital dual technology (ultrasonic and passive infrared) sensor

Non-volatile memory for sensor settings

Coverage range (ceiling mount sensor: 2000 sq. ft.; wall mount sensor: 1600 sq. ft.)

Isolated Form C relay with Normally Open / Normally Closed contacts

For indoor use only

Five year limited warranty
PRECAUTIONS

CAUTION: FOR USE WITH CLASS 2, LOW VOLTAGE SYSTEMS ONLY. DO NOT USE IN HIGH
VOLTAGE APPLICATIONS.

Read and understand all instructions before beginning installation.

NOTICE: For installation by a licensed electrician in accordance with National and/or local Electrical Codes
and the following instructions.

Disconnect switch or a circuit breaker must be provided and marked as the disconnecting device.

Disconnect switch / circuit breaker must be within reach of operator.

CAUTION: RISK OF ELECTRICAL SHOCK. Turn power off at service panel before beginning
installation. Never wire energized electrical components.

CAUTION: USE COPPER CONDUCTOR ONLY.

Confirm device ratings are suitable for application prior to installation. Use of device in applications beyond its
specified ratings or in applications other than its intended use may cause an unsafe condition and will void
manufacturer's warranty.

Use only approved materials and components (i.e. wire nuts, electrical box, etc.) as appropriate for installation.

NOTICE: Do not install if product appears to be damaged.