Noise Power Series Manual
Also See for Power Series:

Advertisement

Noise Power Series Manual

WHAT'S IN THE BOX

  • Noise Power Series 65W GaN Adapter x 1
  • User manual x 1
  • Warranty card x 1

PRODUCT APPEARANCE AND STRUCTURE

HOW TO USE THE NOISE POWER ADAPTER

  • Plug the adapter into the socket
  • Connect a charging cable (not included with this product) at one end to the adapter and your device/s at the other end
  • Disconnect the device/s after it has been fully charged

information Tip: For the fastest and safest charge, use a Noise Power Series cable or your device's original cable.

How to use the US Pin in the Noise Power Adapter?
How to use

  1. Detach the India Pin: Gently slide the India pin outward from the adapter.
  2. Extend the US Pin: Pull up the US pin by lifting it from its recessed position.

PERFORMANCE INDEX

Product Name Noise Power Adapter 65W
Input 100-240~50/60Hz, 1.5A Max
Output (USB-C1/C2) 5V/9V/12V/15V 3A/20V 3.35A (67W Max)
Output (USB-A) 5V 3A, 9V 3A, 12V 2.5A/20V 1.5A(30W Max)
Total Output Power 67W Max
Colour Meteor Black

FEATURES

  • Advanced 65W adapter with fast-charging technology
  • Compact form factor with a size reduction of 30-50% than traditional adapters
  • GaN (Gallium Nitride) technology for efficient power delivery and low heat generation
  • Intelligent power management for optimal charging speeds
  • USB-A and 2 USB-C ports for versatile device compatibility
  • Built-in protection against overcharging
  • Sleek metallic finish with a premium look and feel
  • Lightweight and portable design for hassle-free travel
  • Global compatibility with India and US pins

TROUBLESHOOTING

  • For optimum performance, please use the adapter after carefully going through this user manual
  • Please plug the adapter into an AC socket with a rated voltage of 100-240V.
  • Do not use the adapter with any product which is not in conformity with the rated specifications of this adapter.
  • In case the adapter stops working suddenly, this may be due to an incident of over-current/over-temperature/over-voltage/short-circuit protection. In this case, please unplug the connected device(s). Reconnect your device(s) after 30 seconds, the adapter will resume normal functioning.

SAFETY INSTRUCTIONS

  • Do not place the adapter close to any sources of heat such as fire, stove, candles, etc.
  • Please ensure that no form of liquid is spilt on the adapter. (Any such spill of any liquid on the adapter voids the warranty on the product.)
  • The disconnection from line voltage is made by AC plug.
  • In case of broken plugs, the product must be disposed of.
  • If you want to clean the product, only use a dry cloth or brush.
  • The socket-outlet shall be installed near the equipment and shall be easily accessible.
  • The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
  • For the fastest and safest charge, use a Noise Power Series cable or your device's original cable.

CUSTOMER SUPPORT

If you experience any problem with the adapter, please contact us at support.gonoise.in

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Noise Power Series Manual

Advertisement

Need help?

Need help?

Do you have a question about the Power Series and is the answer not in the manual?

Questions and answers

Table of Contents