Advertisement
Quick Links
1
MK2 / MK3 ASD Quick Start (Tablet / Mobile Phone)
CE
The MK6 RSU complies to Radio Equipment Directive 2014/53/EU. A copy of the Declaration
of conformity is available on request.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
MK6 RSU Quick Start User Guide
www.cohdawireless.com
Version: 3.01
Advertisement
Summary of Contents for Cohda Wireless MK6 RSU
- Page 1 MK6 RSU Quick Start User Guide Version: 3.01 The MK6 RSU complies to Radio Equipment Directive 2014/53/EU. A copy of the Declaration of conformity is available on request. FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 2 WARNING: Modifications not approved by manufacturer could void compliance. Others The MK6 RSU is RoHS and Lead-Free compliant. It complies with the "Directive 2011/65/EU of the European Parliament and the Council on the Restriction of Use of certain Hazardous Substances in Electrical and Electronic Equipment" (RoHS).
-
Page 3: Kit Contents
Kit Contents Unpack the MK6 RSU Kit Following items are included in the MK6 RSU Kit shipment. RSU Unit 4x 5.9GHz Antennas 2x LTE Antennas 2 for DSRC, 2 for C-V2X 2x Bluetooth/WLAN GNSS Antenna Self-Fusing Rubber Tape Antenna Pole Mount Bracket,... - Page 4 In systems without equipotential bonding or with potential differences between the individual grounding points or multiple instances of shield grounding, can result in transient currents at system frequency. These may affect performance of the device. Cohda Wireless Pty Ltd Page 4 of 13...
- Page 5 The product must be supplied to a specialist recycling company. Do not use municipal waste collection points. These may be used for privately used products only in accordance with WEEE Directive 2012/19/EU. Product Identification Cohda Wireless Pty Ltd Page 5 of 13...
-
Page 6: Sim Card Installation
Unscrew 4x Socket head cap screws with size 5 Allan key. Lift enclosure lid carefully. Slide SIM socket cover toward right and slip it up. Insert micro SIM card onto socket. Slip socket cover down and slide it toward left. Cohda Wireless Pty Ltd Page 6 of 13... - Page 7 Fasten screw at location 1, 2, 3 and 4 with torque 10kgf.cm Fasten screw at location 1, 2, 3 and 4 with torque 20kgf.cm Fasten screw at location 1, 2, 3 and 4 with torque 30kgf.cm Cohda Wireless Pty Ltd Page 7 of 13...
- Page 8 Connecting MK6 RSU Assemble Ethernet connector using M12 X-Coded field attachable Ethernet connector. The MK6 RSU can only be powered through the Ethernet port, it supports either Mode A (Endspan) or Mode B (Midspan). The Field-Attachable Ethernet connector suits 7.7- 9.0mm diameter cable by default.
- Page 9 Connect DSRC, C-V2X, LTE, Bluetooth/WLAN and GNSS antennas and M12 Ethernet connector. 1x GNSS Antenna’s 2x LTE Antenna’s 2x C-V2X Antenna’s 2x DSRC Antenna’s 2x Wi-Fi/BT Antenna’s Cohda Wireless Pty Ltd Page 9 of 13...
- Page 10 -Repeat steps and ensure at least one complete wrap is applied. -Cut off any excess. Ensure the surface Stretch tape Done is clean and wrap Both vertical and horizontal mounting with bracket are supported. Horizontal Mount Vertical Mount Cohda Wireless Pty Ltd Page 10 of 13...
- Page 11 The ground wire is recommended to be connected to a good common earth point. RSU attached to Vertical Example of using pole. Stainless Steel Straps. Cohda Wireless Pty Ltd Page 11 of 13...
- Page 12 *2 – The C-V2X technology has applied for the waiver process (waiver document number：DA-23-343) and strictly follow below conditions. Operating Frequency range Channel Band width RSU RF O/P Power 5905 – 5925 Mhz 20Mhz 33dBm EIRP Cohda Wireless Pty Ltd Page 12 of 13...
- Page 13 It can be accessed in two ways: Directly via https://support.cohdawireless.com Through clicking on the “Support” tab on the Cohda Wireless website www.cohdawireless.com On the signup page that opens, enter your name and email address in order to register for Support and access to technical documentation.
Need help?
Do you have a question about the MK6 RSU and is the answer not in the manual?
Questions and answers