Hubbell 42004-354C Manual

Centra-page headset

Advertisement

Model 10453-501 Centra-Page Headset
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The GAI-Tronics Model 10453-501 Headset provides hands-free communication with Centra-Page
systems. The 30-foot extension cable provides the users with mobility when connected to Centra-Page
jack station. The cable is equipped with a belt clip. A push-button switch is provided on the left ear cup
to allow paging access.
The GAI-Tronics headset provides a noise reduction rating of 23 dB, making it ideal for use where
hearing protection is required. Please refer to the attached Environmental Protection Agency (EPA) Use
and Care Sheet for information on maintaining the headset's noise reduction rating (NRR). The
gooseneck (flexboom) microphone is fully adjustable but remains stationary once it is in place. In
addition, the gel-filled ear cups and adjustable black cloth head strap maximize comfort and keep the
headset securely in place. These factors allow the use of the headset in areas with up to 110 dB SPL
ambient noise, improving safety for employees working in these areas.
The headset is adaptable for use with or without hard hats. An employee working in different areas with
different requirements can alternate the use of the same headset, requiring a reduced investment.
Operation
To operate, the GAI-Tronics 10453-501 Headset must be connected to a Centra-Page jack using a
GAI-Tronics Model 10410-002 Extension Cable.
10452-301 Headset
10453-301 Headset (for use with a hard hat)
10453-401 Headset
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374
V
ISIT WWW
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
HEADSET REPLACEMENTS
Old Model Number
800-492-1212
.
-
.
GAI
TRONICS
COM FOR PRODUCT LITERATURE AND MANUALS
New Model Number
10453-501 Headset
10453-501 Headset
10453-501 Headset
Fax: 610-796-5954
Pub. 42004-354C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 42004-354C and is the answer not in the manual?

Questions and answers

Summary of Contents for Hubbell 42004-354C

  • Page 1 Pub. 42004-354C G A I - T R O N I C S ® C O R P O R A T I O N A H U B B E L L C O M P A N Y...
  • Page 2: Specifications

    Listed for use in Class I, Div. 2, Groups C and D hazardous locations when installed in accordance with Control Drawing No. 72979 Extra accessories packed with unit: ..One microphone muff and one pack of comfort covers for ear cups d:\standard ioms - current release\42004 instr. manuals\42004-354c.doc 19532P-71(08-04) 04/06...
  • Page 3 3 of 4 Model 10453-501 Centra-Page Headset Page: Use the Reference Designator numbers on the chart above to find the part number and description on the Replacement Parts Table on page 4. d:\standard ioms - current release\42004 instr. manuals\42004-354c.doc 19532P-71(08-04) 04/06...
  • Page 4: Replacement Parts

    * If item 9 or item 10 require replacement, both pieces must be purchased to make the repair. Replacement Extension Cable Description Part Number 30-Foot Extension Cable with Belt Clip 10410-002 d:\standard ioms - current release\42004 instr. manuals\42004-354c.doc 19532P-71(08-04) 04/06...
  • Page 5: Warranty

    Warranty Equipment. GAI-Tronics warrants for a period of one (1) year from the date of shipment, that any GAI-Tronics equipment supplied hereunder shall be free of defects in material and workmanship, shall comply with the then-current product specifications and product literature, and if applicable, shall be fit for the purpose specified in the agreed upon quotation or proposal document.

Table of Contents