Download Print this page

Magnum First M9-RBW Manual

Room control module

Advertisement

Quick Links

M9-RBW
Room Control Module
Application
Solar-powered room control module with LCD and controls, with smart communication management for measuring room
temperature and for wireless transmission of measured values, occupancy, setpoint and weekly schedule.
The Mx-RBW supports the EnOcean radio standard ISO/IEC 14543-3-10 for direct communication with the Mx-D15 radio
small actuator or an EnOcean gateway. It uses EEP D2-10-01* for connection to an EnOcean gateway.
In combination with the Mx-D15, the Mx-RBW constitutes a functional unit for controlling the room temperature.
Safety Instructions
This data sheet contains information on installing and commissioning the product "Mx-RBW". Each person who carries out
work on this product must have read and understood this data sheet. If you have any questions that are not resolved by
this data sheet, you can obtain further information from the supplier or manufacturer. If the product is not used in accordance
with this data sheet, the protection provided will be impaired. Applicable regulations must be observed when installing
and using the device. Within the EU, these include regulations regarding occupational safety and accident prevention as
well as those from the VDE (Association for Electrical, Electronic & Information Technologies). If the device is used in other
countries, it is the responsibility of the system installer or operator to comply with local regulations. Mounting, installation and
commissioning work on the devices may only be carried out by qualified technicians. Qualified technicians are persons
who are familiar with the described product and who can assess given tasks and recognize possible dangers due to technical
training, knowledge and experience as well as knowledge of the appropriate regulations.
Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the M9-RBW and is the answer not in the manual?

Questions and answers

Summary of Contents for Magnum First M9-RBW

  • Page 1 Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 2 Out of Operation: 5 to 90% rH; non-condensing Installation Flexible mounting using screws or adhesive Weight 0.22 kg Dimensions WxHxD: 90 x 153.7 x 26.7 mm Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 3: Radio Interface

    If the radio communication between the Mx-RBW and the Mx-D15 is interrupted, an internal resynchronization procedure starts automatically. Radio Connection -Gateway operation -Gateway and pair operation Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 4: Installation

    • Minimize the effect of wall thickness (for example partition walls or room dividers) by ensuring that the radio signal passes through the walls at as close to a right angle as possible. Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 5 Prolonged illumination at high intensities, e.g. - Direct sunlight or - Artificial light (such as halogen emitters) can cause damage to the solar cell. Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 6 Room Control Module Installation (continued) Wall Mounting - Flexible screw mounting Wall Mounting - Flexible adhesive mounting with double-sided transparent adhesive strips Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 7 This icon appears on the display when party mode is activated Occupancy indicator Summer mode indicator This icon appears on the display when summer mode is activated Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 8 The device is delivered in a storage mode (display switched off) -This standby state can be ended by simultaneously pressing the knob and the occupancy button for approximately 3 seconds. Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 9 The activated party mode is indicated by the party icon on the display. Party mode can be ended early by pressing the occupancy button. Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 10 If a vacation start is entered which is before the current date, the set dates will not be active until the next calendar year. Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 11 The corresponding usage time is deleted and no longer displayed. Default settings: MOSU Monday - Sunday, 6:00 - 20:00 (6 a.m. - 8 p.m.) Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 12 Set the day. Confirm setting by pressing the knob. Daylight saving time switching occurs automatically according to Central European standards. Default setting: Current Central European time Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 13 - Set the desired temperature units and confirm by pressing the knob. The display switches to the initial display. Default setting: °C Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 14 Confirming the valve position sends the set valve position to all of the taught-in radio actuators with the next communication cycle. Room temperature control is inactive for one transmission/reception interval. Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 15 Up to 4 Mx-D15 radio actuators can be taught-in on the Mx-RBW. - Use the knob to select the “Teach-in radio small actuator” function ACT. Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 16 A teach-in radiogram is sent to the system gateway and a teach-in response is awaited. If the teach-in process is successful, the radio symbol will be continuously displayed. Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 17 ∆2 appears, the batteries of the Mx-D15 must be changed or the radio communication path must be checked. NOTE: Operating and malfunction messages have priority over the 12/24 hour display. Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...
  • Page 18 An increased radio load may occur due to the possible connection of weekly schedule messages (several telegrams that belong together). Unnecessary weekly schedule transmissions should, therefore, be avoided. Magnum First - 1 Seneca Street, 29th Floor, M55 - Buffalo, NY 14203 - phone 716-293-1588 - www.magnumfirst.com - info@magnumfirst.com...