1. Manuals
  2. Brands
  3. Pana-Pacific Manuals
  4. Headsets
  5. BT393
  6. Manual

Pana-Pacific BT393 Manual

Hide thumbs

Advertisement

Table of Contents

This device is utilizing Bluetooth wireless technology. Any device that you want to
work with this headset must be compatible with Bluetooth technology that supports
Bluetooth HEADSET and/or HANDSFREE profiles. Make sure that you have paired
the headset with your Bluetooth phone or other Bluetooth devices before you start to
use it.
BASIC SAFETY INSTRUCTIONS
CAUTION
Do not use headset while charging.
Do not immerse the headset or power adapters in water.
Plastic bags and small parts may cause choking if ingested. Keep them away from
children and pets.
Use only the power adapters enclosed with this product.
Avoid using during lightning storms.
PRODUCT FEATURES
GLOSSARY OF TERMS
l
Idle Mode – Headset is switched on and without any connection with other
Bluetooth devices. The blue indicator flashes once every 4 seconds.
Standby Mode – Headset is switched on and connected with other Bluetooth
l
BT393 Headset

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BT393 and is the answer not in the manual?

Questions and answers

Related Manuals for Pana-Pacific BT393

Summary of Contents for Pana-Pacific BT393

  • Page 1 BT393 Headset This device is utilizing Bluetooth wireless technology. Any device that you want to work with this headset must be compatible with Bluetooth technology that supports Bluetooth HEADSET and/or HANDSFREE profiles. Make sure that you have paired the headset with your Bluetooth phone or other Bluetooth devices before you start to use it.

  • Page 2: Operation Information

    devices but not in In-Call Mode. The blue indicator flashes once every 2 seconds. Standby time is up to 480 hours when full charged. In-Call Mode – The call is activated and able to take a phone call via the headset. The blue indicator flashes 2 times every 2 seconds.

  • Page 3: Headset Adjustments / Microphone Positioning

    outlet. 2. An amber indicator light will illuminate on the headset when the headset is charging. 3. Charge the headset 4 hours before first use. After this, each additional hour of charge time will yield approximately 5 hours of talk time (Up to 14 hours Talk Time total).
  • Page 4 Idle Mode / Standby Mode / In-Call Mode The headset is switched off automatically when you remove it from the power adapter; therefore, you have to turn it on to place the headset in Idle Mode. When the headset is in Idle Mode, the blue indicator light on the headset will flash slowly, every 4 seconds.
  • Page 5 5. Refer to the User’s Manual of your other Bluetooth device for instructions on how to pair the other Bluetooth device to the headset and follow the instructions on the device screen. When prompted, select “BT393” from the list. Enter the pre-programmed passcode “0000” and press “OK”.
  • Page 6 You will hear ascending beeps in two tones and the microphone will be muted. A beep will be heard periodically indicating that the microphone is in Mute Mode. This will not be heard by the other person on the call. Un-Mute the Microphone on the Headset To un-mute the microphone, press and hold down the Volume Up (+) button for 4 seconds.
  • Page 7 the headset connection to the phone by following the procedures under “Connect headset to your phone”. 3. To end the call, short click the multi-function button on the headset. You will hear a beep. The call is disconnected and the headset reverts to Standby Mode. Switching From the Headset to Handset While On a Call If you hear the low battery warning, you will need to immediately press the multi-function button on the headset for 4 seconds and release.
  • Page 8 USING THE HEADSET WITH OTHER BLUETOOTH-ENABLED DEVICES Before use, make sure the headset is on. 1. Turn on the headset and position the microphone properly. 2. Activate your other Bluetooth device and connect the headset according to the User’s Manual of the other device. 3.

  • Page 9: Certification And Safety Approvals/General Information

    Function Matrix Function Headset Status Action Turn On Power Off Long Press Turn Off Idle; Standby Mode Long Press Pairing Power Off Ultra Long Press Pick Up Receive a Call Short Click Hang Up In-Call Mode Short Click Reject Call Receive a Call Long Press Last Number Redial...
  • Page 10 user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Table of Contents