Table of Contents
Advertisement
Wireless-G Range Expander
Password
The Password screen allows you to change the Range Expander's password or restore factory defaults. You can
also back up or restore the Range Expander's configuration file.
• Password. This password protects access to the Web-based Utility. Enter the new password in the Password
field. Then enter it again in the next field to confirm it.
• Restore Factory Defaults. To restore the Range Expander's factory default settings, click the Yes radio
button. Then, click the Save Settings button. Otherwise, keep the default, No.
• Backup/Restore Setting. To back up the configuration file of the Range Expander, click the Backup button.
The File Download screen will appear. Click the Save button and follow the on-screen instructions to back up
the file on your PC.
To restore the back-up configuration file, click the Restore button and follow the on-screen instructions.
Click the Save Settings button to apply your changes, or click the Cancel Changes button to cancel your
changes. If you require additional information, click the Help button.
Chapter 5: Configuring the Wireless-G Range Expander
The Setup Tab
Figure 6-5: Setup Tab - Password
IMPORTANT: Restoring the Range Expander's
factory default settings will erase all of your
Wireless and WEP settings, and replace them with
the factory defaults. Do not reset the Range
Expander if you want to retain these settings.
download: to receive a file transmitted over a network
Figure 6-6: File Download
21
Advertisement
Table of Contents
