Page 1
2. Turn off all related devices before starting the installation. Step 2: Connecting the Extender Cable 1. Connect one end of the DAHUA D6728 to the IR port of the LSXXXUCM-EF controller. 2. Secure the other end of the cable to the IR device you want to extend.
Page 2
5. Configuration and Use The DAHUA D6728 cable requires no additional configuration. Once connected, the IR signal will be extended automatically. If you experience problems with signal transmission, see the Maintenance and Troubleshooting section. 6. Maintenance and Troubleshooting Maintenance - Regularly inspect the cable to ensure there is no physical damage.
Need help?
Do you have a question about the D6728 and is the answer not in the manual?
Questions and answers