1. Important may damage the plastic cover of the display and void the warranty. This electronic user’s guide is intended for anyone who uses the Philips • Remove any object that could fall monitor. Take time to read this user into ventilation holes or prevent manual before you use your monitor.
Page 4
maximum is exceeded, the monitor panel. When moving your monitor, damage will not be covered under grasp the frame to lift; do not lift warranty. the monitor by placing your hand or fingers on the LCD panel. • Do not knock or drop the monitor during operation and/or •...
• Always activate a moving screen Note saver program when you leave Consult a service technician if the your monitor unattended. Always monitor does not operate normally or activate a periodic screen refresh you are not sure what procedure to take application if your monitor will when the operating instructions given in display unchanging static content.
From the planning, design, and production stages, Philips emphasizes the importance of making products that can easily be recycled. At Philips, end-of-life management primarily This marking on the product or its entails participation in national take-...
Package contents Business Monitor 4000 Series 24B2U4301 Quick Start Register your product and get support at www.philips.com/welcome 2. Hold the stand with both hands. (1) Gently attach the base to the stand. (2) Use your fingers to tighten the Power...
Page 8
RJ45 driver installation HDMI DP IN USB C1 USB Type-A You can find the “LAN Drivers” from Philips website support page. Please follow the steps for the installation: Multi-stream transport 1. Install the LAN driver that matches your system. DP IN...
Page 9
driver. Note Please contact Philips service hotline for Mac address clone tool as necessary. USB hub To comply with International energy Note standards, the USB hub/ports of this If you Turn OFF your monitor via the...
What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
Page 11
USB-C Setting High Resolution, High Data Speed software and is easily downloadable USB Standby Mode On, O through the Philips website. What does Setup Power LED 0, 1, 2, 3, 4 SmartControl do? It is an additional Resolution Noti cation...
Page 12
Physical Function Warning Tilt • To avoid potential screen damage, such as panel peeling, ensure that 30° the monitor does not tilt downward by more than -5 degrees. -5° • Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
2.3 Remove the Base Assembly 4. Loosen the assembly screws, Remove the hinge. for VESA Mounting Before you start disassembling the display base, please follow the instructions below to avoid any possible damage or injury. Place the monitor face down on a smooth surface.
Economy and Off. brightness, contrast, color, and sharpness in real-time. Whether you're working with text applications, displaying images, or watching a video, Philips SmartImage delivers great monitor performance. Why do I need it? ...
3.2 SmartContrast • Movie: Ramped up luminance, deepened color saturation, dynamic What is it? contrast, and razor sharpness displays every detail in darker areas It is a unique technology that of your videos without experiencing dynamically analyzes displayed content color washout. and automatically optimizes a monitor's contrast ratio for maximum visual clarity •...
3.3 LightSensor What is it? Light Sensor is a unique and intelligent way of optimizing picture quality by measuring and analyzing the incoming signal to automatically adjust picture quality settings. Light Sensor uses a sensor to adjust the picture brightness depending on the room light conditions.
4. Daisy-chain function DisplayPort Multi-Stream feature enables multiple monitor connections. This Philips display is equipped with DisplayPort interface and DisplayPort over USB C1 which enables daisy-chaining to multiple displays. Now you can daisy chain and use multiple monitors via a single cable from one display to the next.
Page 18
2. We recommend to set USB Setting to USB 3.2, press button, select USB Settings > USB, then select USB 3.2 which supports the LAN speed to 1G. 3. Depends on the graphic card capability, you may connect maximum 3 external monitors.
Page 19
3. Smart Link Sync monitor, achieving a similar luminance between the monitors. This device features a Smart Link Sync function that optimizes the daisy- chained monitors. This function makes it easy and convenient to synchronize the ...
What is it? power delivery depends on the brightness value of the monitor. Smart Power is an exclusive Philips You may adjust the brightness value technology that provides flexible power manually to increase power delivery delivery options for various devices.
6. PowerSensor™ from the monitor use the maximum detection signal for distances up to 120 cm or 47 inches. (Setting 4) How does it work? • Since some dark colored clothing • PowerSensor works on principle tends to absorb infrared signals even of transmission and reception of when the user is within 100 cm or 40 inches of the display, step up signal...
Page 22
monitor is returned to its default Landscape position. Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength.
• Reposition your screen to the appropriate measurment syndrome (CVS) according to your own height. 4. Choose a Philips monitor for viewing Philips monitor is designed to prevent that is easy on the eyes. eye strain caused by prolonged • Anti-glare screen: This feature computer use.
8. Adaptive Sync AMD Radeon R7 260X • AMD Radeon R7 260 • Processor A-Series Desktop and • Mobility APUs Adaptive Sync AMD A10-7890K • AMD A10-7870K • PC gaming has long had an imperfect AMD A10-7850K • experience because GPUs and monitors update at different rates.
9. Technical Specifications Picture/Display Display Panel Type IPS Technology Backlight W-LED Panel Size 23.8" W (60.5 cm) Aspect Ratio 16:9 Pixel Pitch 0.2745(W) x 0.2745(H) Contrast ratio(typical) 1500:1 Native Resolution 1920 x 1080 @ 60 Hz Maximum Resolution 1920 x 1080 @ 120 Hz Viewing Angle 178°...
Page 26
Convenience USER convenience Built-in speaker 2 W x 2 English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brasil Portuguese, Polish, OSD Languages Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese, Japanese, Korean Other Convenience VESA mount(100×100mm), Kensington Lock Plug &...
Page 27
100W depending on the device. Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. The Power delivery function is also based on the PCs capabilities.
9.1 Resolution & Preset Modes Note 1. Please notice that your display works best at native resolution of 1920 H. freq Resolution V. freq (Hz) x 1080 @ 60Hz. For best display (kHz) quality, please follow this resolution recommendation. Recommended 31.47 720 x 400 70.09...
10. Power Management If you have a VESA DPM compliance display card or software installed on your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse, or other input device is detected, the monitor will 'wake up' automatically.
Other Pixel Defect Policy combinations of lit and dark sub-pixels appear as single pixels of other colors. Philips strives to deliver the highest quality products. We use some of the Types of Pixel Defects industry's most advanced manufacturing...
Page 31
Note A red or bright blue dot must be period, a TFT Monitor panel in a Philips more than 50 percent brighter than flat panel monitor must have pixel neighboring dots, while a bright...
Page 32
BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 3 or fewer 2 adjacent dark subpixels 2 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
Disconnect the monitor from the be corrected by a user. If the problem mains power source immediately for persists after you have tried these safety solutions, contact a Philips customer • Contact Philips customer service service representative. representative immediately. Common Problems...
Service contact information listed in • Shut down your computer, the Important information manual disconnect your old monitor, and and contact a Philips customer service reconnect your Philips LCD monitor. representative. • Turn on your display and then turn * Functionality is different according to on your PC.
Page 36
What are the .inf and .icm files? ethyl alcohol, ethanol, acetone, How do I install the drivers (.inf hexane, etc. and .icm)? Can I change the color setting of Ans.: These are the driver files for my display? your monitor. Your computer Ans.: Yes, you can change your color may ask you for monitor drivers setting through OSD control as...
Page 37
Can I connect my LCD monitor to damage mentioned above is not covered any PC, workstation, or Mac? under your warranty. Ans.: Yes. All Philips LCD monitors are Q12: Why is my Display not showing fully compatible with standard sharp text, and is displaying PCs, Macs, and workstations.
Page 38
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the 24B2U4301 and is the answer not in the manual?
Questions and answers