Tavistock ILL6MIR Installation & Aftercare Instructions

ILL6MIR
ILLUMINATED MIRROR
INSTALLATION & AFTERCARE INSTRUCTIONS
FRAME SOLD SEPARATELY
Electrical Safety Instructions
All fittings must be installed by a competent person, in accordance with current IEE wiring regula-
tions.
If in doubt consult a qualified electrician.
Important
Always switch off the electrical supply at the mains during installation and maintenance. It is
recommended that the fuse is withdrawn or the circuit breaker is switched off for the necessary
circuit before installation commences.
Fitting in Bathrooms is subject to the appropriate zone in accordance with IEE Regulations. This
product is suitable for zone 2 and outside zones. IT IS NOT suitable for installation in Zone 0 or
Zone 1. It is also not suitable for installation in saunas, steam rooms or shower cubicles. This product
is only suitable for permanent installation. DO NOT connect to a trailing plug and socket outlet.
Although this product has an Ingress Protection rating of IP44 it is only suitable for indoor use. Do
not attach the product to surfaces that are damp or otherwise electrically conductive.
Installation Care & Safety
Wear suitable eye protection when drilling. Take care when using power tools near water - the use
of a residual current device (RCD) is advised. Beware of hidden cables or pipes. Take care if drilling
on tiled surfaces in case the drill slips. A piece of masking tape applied to the wall before marking out
the fixing holes will stop the drill from wandering.
DO NOT strike glass components with hard or pointed items.
DO NOT place very hot or very cold items against or in close proximity to glass surfaces unless an
adequately thick insulation material is used to prevent such items coming in contact with the glass.
The nominal thickness of the mirror glass used in this product is 5mm and is film backed for safety. If
the glass becomes chipped or broken replace immediately.
This product should be positioned well away from curtains and other fabrics. Never cover the mirror.
This product is heated, we recommend that it is turned off after use and should never be left on for
prolonged periods of time
This product could be dangerous and is only to be installed by a competent person.
ILL6MIR
Cleaning
It is recommended that the unit is cleaned with a soft, dry, non abrasive cloth when turned off.
Never use cleaning agents or abrasive materials on any type of surface finish. Do not allow moisture
to come into contact with the electrical components.
Compliance
This product complies with all relevant
British and European safety standards
Wiring
This product is manufacturues or class I
category and must have an earth
connection
COLOUR CODING:
L - Live
N - Neutral = Blue
- Earth
Lights
To obtain a replacement LED lamp if
faulty or broken contact customer
services (see details at foot of page)
quoting product code.
= Brown
= Green & Yellow
BATHROOM ZONES DIAGRAM
0.6m
0.75m
2
ZONE
1
2
2
OUTSIDE
ZONES
Distances from a bath tub or shower tray
0.6m
0.75m
2