Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Blaupunkt BP-SWM8G8F01
Summary of Contents for Blaupunkt BP-SWM8G8F01
- Page 1 User Manual 16-PORT GIGABIT MANAGED ETHERNET FIBER SWITCH BP-SWM8G8F01...
-
Page 2: Packing List
Commercial Switch User Manual Packing List Ethernet switch/PoE switch, 1 pc Mounting ears, 1 pair Installation accessories, 1 set AC power line (only for AC input), 1 pc DC power adapter (only for DC input) , 1 set User manual, Warranty card, Certificate of conformity, 1 pc RJ45 to DB9 adapter cable (only for managed switches), 1 pc 1. -
Page 3: Login Instructions
recommended to complete it before the switch is installed in the cabinet or hung on the wall. 3.1. Debugging steps for unmanaged switch (plug and play, no configuration) 1) A. The built-in power switch can be directly connected to the AC power cord. B. The external power switch is connected to the DC power adapter and then connected to the AC power supply. - Page 4 3. Configure the computer's IP address to be in the same network segment as the default IP address of the switch. 4. Open the browser on the computer, enter 192.168.2.1, press the Enter key to display the Web network management login interface, and enter the user name admin and the password system.
-
Page 5: Wall-Mounted
Stop bit: 1 Flow control mode: None 4. Press Enter until the emulation terminal prompts the user to enter the user name and password. The default user name for the first login is admin and the password is system. -
Page 6: Rack-Mounted
both sides of the machine with screws. Step 2: As shown in Figure 3, put the switch in a suitable installation position. If the installation wall is a wooden board, use self-tapping screws to fix it. If the installation wall is a concrete wall, you need to drill holes + swelling screws to fix it. ... - Page 7 Step 1: As shown in Figure 4, first fix the mounting ears on both sides of the switch with screws. Step 2: As shown in Figure 5, put the switch in the appropriate position of the standard cabinet, and then fix it on the rack. 5.
- Page 8 Fiber optic port is Blink receiving/sending data Not connected to the network or port failure Transmission rate is at the Speed/ highest 1000M/2 Port speed indicator Green Transmission rate is not at the highest Press and hold for more than 10 RST/ Restore button seconds and release to restore...
- Page 9 Seller: User Name: Purchase Date: Warranty Records: Certificate Inspector Inspection Date Page 1 of 8...
Need help?
Do you have a question about the BP-SWM8G8F01 and is the answer not in the manual?
Questions and answers