LAMBERT HT-10RTA Quick Start Manual

IMPORTANT SAFETY PRECAUTIONS
1. DO NOT carry passengers in cart. It is designed to
carry materials only.
2. DO NOT tow cart on public thoroughfares.
3. Use LOW speeds, 3 M.P.H. or less, when pulling heavy
loads.
4. AVOID towing of cart on STEEP slopes.
5. ALWAYS hitch cart to tractor and make certain tongue
latch is engaged before loading.
6. Make CERTAIN rear of cart is clear before dumping.
7. DO NOT overload cart, MAXIMUM LOAD capacity is
750 lbs.
MAINTENANCE
1. Check tire pressure regularly; 30 PSI maximum is
recommended.
2. Grease wheels every 10 hours of operation of cart,
using grease fittings on wheel hubs.
3. Add a few drops of light oil at pivot of tongue latch (27)
every 3 or 4 weeks usage and before storing for long
periods.
4. Wipe cart clean of debris and moisture after each use.
DUMPING OPERATIONS
Lift Tailgate (19) up until Tailgate Latches (20) and Pins
(21) are disengaged and remove Tailgate. Release Tongue
Latch (27) to dump Cart. See Fig. 3 and 5.
The merchandise you have purchased from us has been carefully
engineered and manufactured under Lambert Corporation's rigid
quality standards and should give you satisfactory dependable
operation. However, like all mechanical merchandise, it may
occasionally require adjustment or maintenance. Should you ever
need technical assistance, please contact the Service Department
noted below.
SAVE THIS MANUAL
This manual is your only reference to all replacement parts
and service contacts.
INSTRUCTIONS FOR ORDERING PARTS
Note: Be sure to specify color (if any) of any parts you order.
(Minimum Parts Order Charge: $10.00)
To eliminate error and speed delivery, follow these suggestions.
1. Address all parts orders or correspondence regarding service
to:
Parts Department
Mid West Products, Inc.
PO Box 301
Phillipsburg, OH 45354-0301
(937) 337-3641 Ext. 108
2. Print or type your name and address clearly.
3. Explain where and how to ship.
4. Give correct model number from owner's manual or product
and state color if part is painted.
5. Give part number, as well as a description of the part, and the
quantity you need of each part.
6. Inspect all shipments you receive. If any parts are damaged or
missing, file a claim with the carrier before accepting.
7.
Parts will be shipped immediately upon receipt of your order
and payment. We can accept check or if you prefer to use
your Credit Card, state your name as it is on your card, card
number, expiration date, 3/4 digit verification number and
billing ZIP code.