SW-Motech ADV.07.976.66000/B Mounting Instructions

Hide thumbs

page of 59

/ 59
Bookmarks

Quick Links

Download this manual

ANBAUANLEITUNG

mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio

ADV.07.976.66000/B

beinhaltet • contains • contient • contiene • contiene

KFT.07.976.30000/B

KFT.00.152.36000

GPT.07.976.19000/B

GPT.00.152.36200/B

HSK.00.745.11001/B

HSK.00.745.12000/B

LOC.00.745.10200

Need help?

Do you have a question about the ADV.07.976.66000/B and is the answer not in the manual?

Questions and answers

Summary of Contents for SW-Motech ADV.07.976.66000/B

Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio ADV.07.976.66000/B beinhaltet • contains • contient • contiene • contiene KFT.07.976.30000/B KFT.00.152.36000 GPT.07.976.19000/B GPT.00.152.36200/B HSK.00.745.11001/B HSK.00.745.12000/B LOC.00.745.10200...
Page 2 ~ 1 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 3 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 4 M8 x 25; DIN 6912 KFT.07.976.001.11 KFT.07.976.002L.11 KFT.07.976.002R.11 KFT.07.976.003L.11 KFT.07.976.003R.11 SC.ST.08.025.02.6912.088 ø 8,4; DIN 125 US.ST.084.02.125 KFT.07.976.971.01.11 KFT.07.976.972.01.11 KFT.07.976.004.11 KFT.00.152.SV.8 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 5 ×  WARNING: Always use the proper tools! Screw the tabs (1) with the attachment parts assigned for your SW-MOTECH adapter kit to the mounting points shown on the side carriers (15/16). Please follow the mounting instructions for the SW-MOTECH adapter kit.
Page 6 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!  NOTE: If the original side carriers are mounted, they must be removed as described below before mounting the SW-MOTECH carrier. If not, skip to step 7. Remove the seat and passenger seat from the vehicle. Depending on how the vehicle is equipped, first disconnect the power supply cables of the seats.
Page 7 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Loosen the marked screws on both sides (2x per vehicle side) and remove the crossbar from the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 8 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Loosen the marked screws on both sides (3x per vehicle side) of the original rack. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 9 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Loosen the marked screws on both sides (2x per vehicle side) of the frame cover. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 10 Lift the frame cover and loosen the plugs underneath the original side carriers. Then lift the original rack and remove the side carriers from the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 11 Tighten the original screws (Orig.) the fastening tabs (10/11) and (12/13) according to the vehicle manufacturer's specifications. × × × × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 12 × back on the vehicle in reverse order.  NOTE: The SW-MOTECH anti-theft devices are available separately; mount the anti-theft protection devices on both sides at the indicated position. Connect the side carriers (16/17) on both sides using the quick-release fasteners (19) to the fastening tabs (9), (10/11) and (12/13) as well as to the ×...
Page 13 Association for Technical Inspection) regulations. After assembly, parts that are subject to registration should be entered into the vehicle documents by your test center. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 14 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 15 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 16 M6 x 12; ISO 7380 M6 x 25; DIN 7991 M6; DIN 6927 HSK.00.745.025.35GR SC.ST.06.012.02.7380.109 GPT.00.152.010.35 SC.ST.06.025.02.7991.088 MU.ST.06.02.6927.08 KFT.00.152.026.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 17 Tighten the screws as specified in the mounting instructions. 9 Nm Then insert the rubber dampeners (6) into the indicated openings. × × 9 Nm × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 18 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 19 ~ 0.5 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 20 Indicates the tightening torque of a part specified by SW- strength; M (MEDIUM): medium strength; L (LOW): MOTECH or the vehicle manufacturer (OEM). low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 21 SC.ST.08.065.02.6912.088 DB.00.180.084.022.01 M6 x 20; DIN 7380 ø 6.4; DIN 9021 ø 8,4; DIN 125 GPT.00.152.002.11 SC.ST.06.020.02.7380.109 US.ST.064.02.9021 US.ST.084.02.125 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 22 The illustrations on the right show the disassembly/assembly on the vehicle model with the original rack. Both versions Remove the original parts shown from the rear of the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 23  WARNING: Use a liquid threadlocker! Tighten the screws (7) according to the vehicle manufacturer’s specifications. × × × × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 24  WARNING: Use a liquid threadlocker! Tighten the screws (10) as specified in the mounting instructions. × 8 Nm × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 25 TÜV regulations. After assembly, parts that are subject to registration should be entered in the vehicle documents by your test center. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 26 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 27 Indicates the tightening torque of a part specified by SW- strength; M (MEDIUM): medium strength; L (LOW): MOTECH or the vehicle manufacturer (OEM). low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 28 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! M6 x 14; ISO 7380 M6 x 25; DIN 7991 HSK.00.745.025.35GR SC.ST.06.014.02.7380.109 GPT.00.152.035.02 GPT.00.152.010.35 SC.ST.06.025.02.7991.088 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 29  WARNING: Use a liquid threadlocker! Tighten the screws as specified in the mounting instructions. × 9 Nm × × × 9 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 30 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 31 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 32 Tighten by hand: Indicates that the attachment must be thread lock should be used at this point. carefully tightened by hand. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 33 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.80000/B HSK.00.745.027.02 4 x 10; WN 1452 HSK.00.745.047.02 SC.ST.040.010.48.1452.109 TRX.T20 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 34 1.1 - Press the DUSC release button (1) and pull the lid latch buckle to the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 35 When closing the lid, make sure that the lid limiters (2) are not trapped between the lid and the case body. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 36  WARNING: Over-tightening the screws may damage the lock casing!  NOTE: Ensure that the locking mechanism is in working order! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 37 4.2 - Press the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH rack. 4.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH rack.
Page 38 5.2 - Slide the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH side carrier. 5.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH side carrier.
Page 39 When reassembling the inlays, make sure to carefully push them behind the frame profiles. Also, press the inlay in the case body onto the Velcro strips. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 40  NOTE: Surface materials may be subject to fluctuations in color (fading) in the event of prolonged and intensive exposure to sunlight and the elements (e.g. smog, acid rain, etc.)! SW-MOTECH is not responsible for this type of wear! The content translation is automated.
Page 41  DANGER: The maximum vehicle load defined by the vehicle manufacturer may NOT be exceeded. The maximum permissible load of the SW-MOTECH rack/side rack may NOT be exceeded; make sure to take into account the dead weight of the product.
Page 42 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 43 Tighten by hand: Indicates that the attachment must be thread lock should be used at this point. carefully tightened by hand. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 44 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.80200/B HSK.00.745.027.02 4 x 10; WN 1452 HSK.00.745.047.02 SC.ST.040.010.48.1452.109 TRX.T20 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 45 1.1 - Press the DUSC release button (1) and pull the lid latch buckle to the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 46 When closing the lid, make sure that the lid limiters (2) are not trapped between the lid and the case body. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 47  WARNING: Over-tightening the screws may damage the lock casing!  NOTE: Ensure that the locking mechanism is in working order! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 48 4.2 - Press the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH rack. 4.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH rack.
Page 49 When reassembling the inlays, make sure to carefully push them behind the frame profiles. Also, press the inlay in the case body onto the Velcro strips. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 50  NOTE: Surface materials may be subject to fluctuations in color (fading) in the event of prolonged and intensive exposure to sunlight and the elements (e.g. smog, acid rain, etc.)! SW-MOTECH is not responsible for this type of wear! The content translation is automated.
Page 51  DANGER: The maximum vehicle load defined by the vehicle manufacturer may NOT be exceeded. The maximum permissible load of the SW-MOTECH rack/side rack may NOT be exceeded; make sure to take into account the dead weight of the product.
Page 52 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 53 ASSEMBLY section, the vehicle manufacturer's our online shop: specifications must be observed and applied. www.sw-motech.com The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 54 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.500.04 TRX.T20 ALK.00.165.A63 ALK.00.165.562.01 QLS.00.095.520.01 SV.ST.095.007.LK.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 55 1.1 - Press the DUSC release button (*) and pull the lid latch buckle into the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 56  NOTE: Ensure that the locking mechanism is in working order! ×  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 57 Secure the lock (4) on the inside with the safety clip  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 58 4.4 - Then the anti-theft protection device (5) must be secured against unscrewing.  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 59 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.

This manual is also suitable for:

Kft.07.976.30000/b Kft.00.152.36000 Gpt.07.976.19000/b Gpt.00.152.36200/b Hsk.00.745.11001/b Hsk.00.745.12000/b ... Show all